Hello everyone,
I am using CBQ.init to shape bandwidth but I have a problem.
Linux PC2 (192.168.0.10)
|
+---------------------+
|eth0 192.168.0.1 | ← Linux router
|---------------------|
|eth1 192.168.1.1 |
+---------------------+
|
Linux PC1 (192.168.1.10)
I want to limit bandwidth from "Linux PC1" to "Linux PC2"
more than 10Mbps.
So I set CBQ.init following like this.
/etc/rc.d/CBQ.init
DEVICE=eth0,100Mbit,10Mbit
RATE=10Mbit
WEIGHT=1Mbit
PRIO=5
When I set RATE=6Mbit,I can limit bandwidth 6Mbps.
But I set RATE=7Mbit,8Mbit,...
I can limit bandwidth only 6.95Mbps everytime.
Why?
Could you tell me how to limit bandwidth more than 7Mbps.
Mitsuru MIZUTANI
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
