Hi,
> ftp> get test
> local: test remote: test
> 227 Entering Passive Mode (203,200,72,102,12,231)
^^^^^^^^^^^^
> 150 Opening BINARY mode data connection for test (1025830 bytes).
> ##############################################################
> ########...................################
> 226 Transfer complete.
> 1025830 bytes received in 262 secs (3.8 Kbytes/sec)
> ftp>
This log shows that you are using Passive FTP
> tc filter add dev eth0 parent 10: protocol ip prio 100 u32 match ip sport
> 20 0xffff flowid 10:10
now you put up a rule for sport 20.
Passiv FTP does not use sport 20, it uses any port > 1024,
only "active" FTP uses port 20 as sport for data transfare,..
Jan Gerritsen
���x%��,S
f��f�v�Z�Xm��������ݳ֧����Y���b�ا~��j�\ �:m���j�\��?
