Hey everyone,
I tried to mark traffic based on per subnet as to the usual per ip.
Example:
Tc class add dev eth0 parent 1:11 htb rate 400kbit ceil 500kbit prio4
Tc filter add dev eth0 parent 1:0 protocol ip prio 7 u32 dst
192.168.0.0/24 classid 1:11
After I enter this command, I did not get any errors.
Does this mean that EACH IP belonging to that subnet will have a maximum
rate of 400kbit?
Or does it mean that ALL the IPs in that subnet have a total of 400kbit?
Thanks in advance.
Regards
edmund
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
