Hi... I have 2 ADSL lines (ppp0 and ppp1) on the same machine, and at first moment, I
just want to make them both ping correctly from the internet.
I already setup 2 links on the same machine, following the item 4.2.1 (split access)
of the LARTC-HOWTO. I guess it was one dial-up link and one ADSL.
But now, I have two ADSL lines, both from the same provider, and both lines use the
same P-t-P peer. I guess this is why I can't make work this dual link stuff... What
should I do?
ppp0 Link encap:Point-to-Point Protocol
inet addr:200.163.173.xxx P-t-P:200.180.128.228 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:9178 Metric:1
RX packets:1083 errors:0 dropped:0 overruns:0 frame:0
TX packets:978 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:287476 (280.7 KiB) TX bytes:80139 (78.2 KiB)
ppp1 Link encap:Point-to-Point Protocol
inet addr:200.163.187.xxx P-t-P:200.180.128.228 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:9178 Metric:1
RX packets:14 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:568 (568.0 b) TX bytes:61 (61.0 b)
Thanks in advance
Rodrigo
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
