Hello again, I tested it with MTU 128 and it works fine :) ... for now I will set it with 2.6 kernel
Thanks a lot :) on Wednesday, November 12, 2003, 12:49:01 AM, ste napisali SS> Hello, SS> I tried to set shaper on my local lan with HTB and rate 60mbit SS> I used linux-2.4.22 and tried with 2.4.23rc1 - all QoS and HTB related SS> staff compiled like modules. In both kernels the rate did not reach SS> more than 30mbit( 3MB/sec ) SS> When I delete shaper I can reach 9MB/sec ( about 74mbit ) SS> if I set shaper more than 25mbit the speed did not increase :) SS> I tried this with kernel 2.6.test9 and everything is OK shaper works SS> on 60mbit - so I think this is problem of the current kernel SS> Any ideas ? :) -- Regards, Svetlin Simeonov _______________________________________________ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
