Re: [LARTC] HTB - default class is used only

[Dan1]

Is this also a masquerading (SNAT) box?  If so, the source IP address 
will
no longer be 192.168.1.0/24 but rather the public IP on your box.  You'll
need to use marking.
Hello,

yes, this is router, with eth0 as internet interface and eth1 as local
interface (with masquerading local hosts) - this may be the reason.
Thank you, for your help, I will try to use marking,

Dan.



_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/