Hello, Possible solution is make smaller burst parameters:
tc class add dev $DEV parent 1:0 classid 1:122 htb rate 12kbit ceil 16kbit burst 1500 prio 3 In this case pages whith size more than 1500 bytes will limit outgoing speed. > Good evening, everybody! > > I have a simple question about shaping bursty www-traffic using > htb. Sorry if such question sounded before. > > I have got a task to limit bulk www downloads but still to show > good speed for small pages. > I think it something like this: rate should be defined dynamically > from > maximum speed - 64 kbit/s to minimum speed - 12 kbit/s, > average speed - 16 kbit/s. > > Question - how can I regulate this average parameter ? > > All I decided is > tc class add dev $DEV parent 1:0 classid 1:122 htb rate 12kbit ceil > 16kbit burst 64k prio 3 > > Is it what I meant ? > > But sometimes when I look the statistics of shaping I find that this > class has negative tokens or ctokens values. > Is it due to very low rate and big burst? > > Or maybe somebody has his own values for bursty www-traffic. > > Thanks in advance. > > Andrian > > > _______________________________________________ > LARTC mailing list / [EMAIL PROTECTED] > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ -- /bye ---------------------------------------------------------------------- Dmitry U.Labutcky System administrator of Swift Trace mail to: [EMAIL PROTECTED] Simferopol, Crimea, Ukraine phone: +380-652-516546 Yaltinskaya 20, office 502 _______________________________________________ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
