Well I�m quite confused about this. I had always shaped on the router
(eth0 for outgoing and eth1 for incoming), everything was ok. Now the
scenario is different since I want to use a bridge for limiting (not
shaping and this is my mistake, I think :)) the 1Mbit connection to
512Kbit for the bridge and the other 512Kbit to go other way (not passing
through the bridge). So I think I should do this in a different way,
right?
What should I do to acomplish this? Thanks for your help and patience.
Cheers.
-----Original Message-----
From: Stef Coene <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Date: Sat, 6 Mar 2004 13:15:44 +0100
Subject: Re: [LARTC] Limiting bandwidth to entire LAN
> On Friday 05 March 2004 01:07, Damion de Soto wrote:
> > Hi Gast�n,
> >
> > > tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match ip
> src
> > > 1.2.3.0/24 classid 1:30
> > >
> > > tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip
> dst
> > > 1.2.3.0/24 classid 1:30
> >
> > I'm pretty sure you want 'flowid 1:30' instead of classid on the
> filters.
> >
> > To my knowledge, the classid is declaring the filter to have that
> class,
> > instead of directing the matching to the class with that id.
> Fowid and classid are the same (from f_u32.c) :
> } else if (matches(*argv, "classid") == 0 ||
> strcmp(*argv, "flowid") == 0) {
>
> Stef
>
> --
> [EMAIL PROTECTED]
> �"Using Linux as bandwidth manager"
> � � �http://www.docum.org/
> � � �#lartc @ irc.openprojects.net
> _______________________________________________
> LARTC mailing list / [EMAIL PROTECTED]
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
