I posted out on this problem some time ago and could never get 2.4.25 or any 2.6 kernel to work with TC + Bridging. If anyone has this working and has actually tested it (I am actually just doing IP based iptables filtering from my bridge interface) please let us know what version of iproute you used and what patches you applied and with which version of the kernel.
The older 2.4.2x kernel's seem to work fine for this (I am currently running 2.4.22). Roy -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Monday, March 15, 2004 3:03 PM To: [EMAIL PROTECTED] Subject: Re: [LARTC] Bridge + TC Hi, > I have also tried that. I'm using 2.6.3-mm3 -> packets don't seem to > Perhaps the key here is 2.4. I might have to revert... There was a change with kernel 2.6.0 for incoming and outgoing interfaces of a bridge device (at least for iptables - that's why I'm guessing it also affects ebtables): > ebtables -A FORWARD -i eth1 -j mark --set-mark 0x1 > ebtables -A FORWARD -i eth2 -j mark --set-mark 0x2 Well for iptables a similar rule would look like: iptables -A FORWARD -i eth1 -j MARK --set-mark 0x1 If eth1 is a port of a bridge you have to use with 2.6.x this: iptables -A FORWARD -m physdev --physdev-in eth1 -j MARK --set-mark 0x1 Having a closer look at this may help solving your problem? Regards, -- +++ NEU bei GMX und erstmalig in Deutschland: T�V-gepr�fter Virenschutz +++ 100% Virenerkennung nach Wildlist. Infos: http://www.gmx.net/virenschutz _______________________________________________ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ _______________________________________________ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
