I'm still confused about choosing r2q and quantum values. I've got different classes. Some have rate as low as 16Kbit and some have 2048Kbit. I'm using default r2q value ie 10 I guess. Also I'm using same quantum value for all the classes (ie quantum 1500) whatever their rate is. Is this a good practice? I don't know. For r2q=10 I think the value that i'm using for quantuim (1500) is very high! In this case Should I lower the quantum value or the r2q value.
I think I have two options: 1. r2q=1 and qunatum=1500 2. r2q=10 and quantum=150 which one is better? with regards, Bikrant On Saturday 20 March 2004 03:38, Roy wrote: > Simply set quantum manualy, > now quantum = rate / r2q > set quantum to one mtu ( 1500 bytes) > > Remember that quantum affects priority > bigger quantum means higer priority. > > > ----- Original Message ----- > From: "ThE LinuX_KiD" <[EMAIL PROTECTED]> > To: "lartc" <[EMAIL PROTECTED]> > Sent: Friday, March 19, 2004 11:20 PM > Subject: [LARTC] r2q > > > Hi... > > > > I'm working with HTB, and have a question... > > > > what happen if I create a class of '"'8kbit'"' ?? > > > > I get a log : > > > > '"'HTB: quantum of class .... is small. Consider r2q change'"' > > > > but, my r2q=1 I can't reduce that variable... > > > > how must I procced ? > > > > Thank you! > > mac > > _______________________________________________ > > LARTC mailing list / [EMAIL PROTECTED] > > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > > _______________________________________________ > LARTC mailing list / [EMAIL PROTECTED] > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ _______________________________________________ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
