hello,
i want to know if there is any method to route traffic
based on the load of a link.
imagine the following scenario:
+----------+ +------+ +------+ +----------+
| subnet 1 |#####| rt 1 |--------| rt 2 |#####| subnet 2 |
+----------+ +------+ +------+ +----------+
\ /
\ +------+ /
\| rt 3 |/
+------+
the bandwidth of the links is as follows:
sn1 - rt1 100mbit
sn2 - rt2 100mbit
rt1 - rt2 - rt3 10mbit
now there are multiple flows from sn1 to sn2.
if the load on the prefered link (rt1-rt2) is 80% or more
i want to utilisize the rt1-rt3-rt2 route as well.
but only in this case - not normaly.
so i think ecmp with weights is not the solution to this.
anyone out there who can point me in the right direction?
thanx in advance
bye bye birger
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
