Hello Everyone,
Hope everyone is doing well.
First off I would like to say that Lartc has been an invaluable source
of information for me, I was looking for a solution and a bit of
google'ing found this wonderful HOW-TO.
So now down to the Question:
I have three Internet connections, (Soon to be four if I can get this
working)
ETH0 - 2mb/2mb
ETH1 - 7mb/1mb
ETH2 - 7mb/1mb
I wish to get these connections load balanced for outgoing traffic, and
I've hit a small problem. eth0 and eth2 are balancing just fine, doing
what they are suppose to. eth0 takes most of the connections and eth2
picks up the slack (Perfect). However eth1 is not sending out "ANY"
outgoing information unless its connected directly to. I followed the
How-To, however its only based on Two Internet connections.
I'm guessing I've just made an error when trying to setup three
connections. Any help would be great.
System information:
Fedora Core release 2 (Tettnang)
Kernel 2.6.5-1.358
Config File
(IPs have been changed slightly to protect their anonymity)
ip route add 23.215.3.16/28 dev eth0 src 23.215.3.20 table T1
ip route add default via 23.215.3.17 table T1
ip route add 23.215.4.0/26 dev eth2 src 23.215.4.61 table T2
ip route add default via 23.215.4.1 table T2
ip route add 23.215.16.0/21 dev eth1 src 23.215.17.54 table T3
ip route add default via 23.215.16.1 table T3
ip route add 23.215.3.17 dev eth0 src 23.215.3.20
ip route add 23.215.4.1 dev eth2 src 23.215.4.61
ip route add 23.215.16.1 dev eth1 src 23.215.17.54
ip rule add from 23.215.3.20 table T1
ip rule add from 23.215.17.54 table T3
ip rule add from 23.215.4.61 table T2
ip route add 23.215.3.20 dev eth0 table T1
ip route add 23.215.4.61 dev eth2 table T1
ip route add 23.215.17.54 dev eth1 table T1
ip route add 127.0.0.0/8 dev lo table T1
ip route add 23.215.3.20 dev eth0 table T2
ip route add 23.215.4.61 dev eth2 table T2
ip route add 23.215.17.54 dev eth1 table T2
ip route add 127.0.0.0/8 dev lo table T2
ip route add 127.0.0.0/8 dev lo table T3
ip route add 23.215.17.54 dev eth1 table T3
ip route add 23.215.4.61 dev eth2 table T3
ip route add 23.215.3.20 dev eth0 table T3
#Load Balancing
ip route add default scope global nexthop via 23.215.3.17 dev eth0
weight 40 nexthop via 23.215.4.1 dev eth2 weight 30 nexthop via
23.215.16.1 dev eth1 weight 30
Any help would be great, this is a new procedure for me and it would be
nice to get it all sorted out and working.
- Jason
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
