On Thursday 26 August 2004 15:06, Marcos Schonfeld wrote:
Hi Marcos,
> ip route add $P1_NET dev $IF1 src $IP1 table 10
> ip route add default via $P1 table 10
> ip route add $P2_NET dev $IF2 src $IP2 table 20
> ip route add default via $P2 table 20
>
> ip route add $P1_NET dev $IF1 src $IP1 # This may be not necessary
> ip route add $P2_NET dev $IF2 src $IP2 # This may be not necessary
>
> ## ip route add default via $P1 ## You don't have to set this default
> gw, because you'll be routing accross this gateway instead of doing
> load-balance
>
> ip rule add from $IP1 table T1
> ip rule add from $IP2 table T2
shouldn't this be table 10 and table 20? :)
anyway, I have a problem settings this up. I get:
ip route add 212.71.142.210/29 dev eth1 src 212.71.142.210 table 10
RTNETLINK answers: Invalid argument
ip route add default via 212.71.142.209 table 10
ip route add 61.212.57.152/29 dev eth2 src 61.212.57.152 table 20
ip route add default via 61.212.57.153 table 20
ip route add 212.71.142.210/29 dev eth1 src 212.71.142.210
RTNETLINK answers: Invalid argument
ip route add 61.212.57.152/29 dev eth2 src 61.212.57.152
RTNETLINK answers: File exists
ip rule add from 212.71.142.210 table 10
ip rule add from 61.212.57.152 table 20
strace from 1st RTNETLINK invalid argument:
....
controllen=0, msg_flags=0}, 0) = 36
dup(2) = 4
fcntl64(4, F_GETFL) = 0x8002 (flags O_RDWR|O_LARGEFILE)
fstat64(4, {st_mode=S_IFCHR|0600, st_rdev=makedev(136, 0), ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x4b3ed000
_llseek(4, 0, 0xb8526df0, SEEK_CUR) = -1 ESPIPE (Illegal seek)
write(4, "RTNETLINK answers: Invalid argum"..., 36) = 36
close(4) = 0
munmap(0x4b3ed000, 4096) = 0
brk(0)
any idea what I am doing wrong?
Thanks alot.
--
ciao, Marc
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
