On Tuesday 28 September 2004 08:57, Stephan M. Ott wrote: > Hi folks, > > I'm trying to shape two clients in my LAN when accessing the internet. > Actual situation is that EVERY traffic goes into 1:40, so the client > which should fall into 1:30 does not get the lower uplink it should > have, but the uplink defined for the client defined as 1:30 > When I disable the definition of 1:40, every traffic falls into 1:30 > (except for the traffic defined to be in 1:10 and 1:20, this works) > As I'm somewhat new to this, I'm stuck and don't know what I have to > change in order to make it work.
> Can someone help me out ? What goes wrong here ? The iptables and tc numbers are hex, so try 0x8 and 0x128. iptables -t mangle -A FORWARD -s 192.168.0.51/29 -j MARK --set-mark 0x8 iptables -t mangle -A FORWARD -s 192.168.0.55/29 -j MARK --set-mark 0x128 tc filter add dev $DEV parent 1:0 protocol ip prio 30 handle 0x8 fw flowid 1:30 tc filter add dev $DEV parent 1:0 protocol ip prio 40 handle 0x128 fw flowid 1:40 Stef -- [EMAIL PROTECTED] �"Using Linux as bandwidth manager" � � �http://www.docum.org/ _______________________________________________ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
