> [EMAIL PROTECTED] wrote: > > Your gues is right. To get HTB work correctly you must know rate parameter > > for your connection also known as CIR. > > Coud you tell what minimum rate your clients have? > > My worst HTB class has rate&ceil 778bps. > > I guess the lower the rate, the less accurate the result. It can't be > accurate, because the class already exceeds it's limit by sending just > one single packet. I agree. As far as I know average MTU is 1500bytes. I have rate 13kbit/8=1625bytes so the limit should not be reached. Maybe there is overhead on ppp link and with this overhead clients gets congested? What do you think? Any ideas? > Maybe it's more accurate in the long run, but I don't have any > statistics to prove that. Anyway, the traffic for that class is damn > slow, and that's all I need to know. ;-) > > Andreas >
_______________________________________________ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
