[EMAIL PROTECTED] wrote:
I am still looking for a solution to this problem.......
[EMAIL PROTECTED] wrote:
Hi, Yes i did give this a try a couple of times before with no success
/sbin/iptables -I OUTPUT -m nth --every 2 --packet 1 -t mangle -j MARK --set-mark 0x2 /sbin/iptables -I OUTPUT -m nth --every 2 --packet 0 -t mangle -j MARK --set-mark 0x1
Had a go at this on 2.6.9 / iptables 1.2.11 and it seeems nth is broken.
I'll try again tomorrow.
Seems still broken.
I built vanilla(apart from nth) 2.6.10, new iptables 1.2.11 + pom-200400621 with runme extra only said y to nth.
I see -
Chain OUTPUT (policy ACCEPT 817 packets, 103K bytes)
pkts bytes target prot opt in out source destination
15 1260 MARK all -- * eth0 0.0.0.0/0 0.0.0.0/0 every 2th packet #0 MARK set 0x1
15 1260 MARK all -- * eth0 0.0.0.0/0 0.0.0.0/0 every 2th packet #1 MARK set 0x2
Chain POSTROUTING (policy ACCEPT 817 packets, 103K bytes)
pkts bytes target prot opt in out source destination
0 0 all -- * eth0 0.0.0.0/0 0.0.0.0/0 MARK match 0x1
15 1260 all -- * eth0 0.0.0.0/0 0.0.0.0/0 MARK match 0x2
[EMAIL PROTECTED] /home/andy]# cat ./nth-test
iptables -t mangle -A OUTPUT -o eth0 -m nth --counter 1 --every 2 --packet 0 -j MARK --set-mark 1
iptables -t mangle -A OUTPUT -o eth0 -m nth --counter 1 --every 2 --packet 1 -j MARK --set-mark 2
iptables -t mangle -A POSTROUTING -o eth0 -m mark --mark 1
iptables -t mangle -A POSTROUTING -o eth0 -m mark --mark 2
Any Ideas anyone?
TIA
Andy.
_______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
