Hi all, I have read the larc howto and I need to apply a traffic shaper
with this configuration:
router / two interface etho and eth1
lan
lan is on eth1 and on eth0 I've the dsl connection (1.2 Mbit / 256 kbit)
I need to limit the bandwith towards lan and I've thought at HTB and
tcng. I write the script belove. I want limit the p2p and ftp (ssh and
irc) connection at 15 kBps (128 kbps) and the other type of traffic at
32 kBps (256kbps). Is the script right?
Moreover I want understand better how htb work: I can shape the traffic
router->lan but I can't shape traffic lan->router, is it right? In this
way I can limit the bandwidht towards lan, but I have the bandwith
towards router always full.
Thanks
P.S.: sorry for my very bad english :)
############# script #########
/*
*Simply tcng traffic control file.
*/
#define INTERFACE eth1
dev INTERFACE {
egress {
class( <$p2p> )
if tcp_sport == 4662
if udp_sport == 4672
if udp_sport == 4666
if tcp_sport == 6882
if tcp_sport == 6346
class ( <$ftp> )
if tcp_sport == 21
if tcp_sport == 22 || ip_tos_delay == 1
if tcp_sport == 6667 || tcp_dport == 7000;
class ( <$def> )
if 1 ;
htb () {
class ( rate 256kbps, ceil 256kbps ) {
$p2p = class ( rate 56kbps, ceil 128kbps ) { sfq; } ;
$ftp = class ( rate 56kbps, ceil 128kbps ) { sfq; } ;
$def = class ( rate 256kbps, ceil 256kbps ) { sfq; } ;
}
}
}
}
##############################
--
Email.it, the professional e-mail, gratis per te: http://www.email.it/f
Sponsor:
Digitalpix: Il metodo pi� comodo, veloce e conveniente
* per stampare le tue foto digitali migliori.
Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=1523&d=14-5
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
