Hello everyone...
I have a little trouble and need some help :P
How can I check on which interface the packet is going (eth0, eth1; I
have two ISP and on eth3 little LAN), using to check it TC and IMQ? (HTB
script)
I tried to mark packets, but on chain POSTROUTING this does not work...
Maybe because packets fall on IMQ before signing.
I tried marking it on FORWARD but packets also didn't hit their class.
PREROUTING is working(!), but with this I can only queued download traffic.
Problem is very essential. I need to distinguish on which interface
packet is going.
Im routing packet using this:
ip route add default via 192.168.10.1 dev eth0 table neo
ip rule add fwmark 0x03 table neo
ip route add 80.53.133.24/29 dev $DEV_DSL table dsl
ip rule add fwmark 0x04 table dsl
And I'm marking traffic as I want.
IMQ is working in AB mode. I have src IP before nat, and dst after nat.
Upload traffic is going to IMQ1 here:
iptables -t mangle -A POSTROUTING -j IMQ --todev 1
Some ideas?
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
