You should use:
tc class add dev eth1 parent 1:1 classid 1:10 htb rate 64kbit ceil 64kbit quantum 1501
And then it would use 64kbit as a hard cap, only going past it for short bursts when trying to maintain 64kbit as the average (cburst paramater can control this, but shouldn't be neccasary).
- Jody
On 9/30/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]
> wrote:
tc class add dev eth1 parent 1:1 classid 1:10 htb rate 64kbit quantum 1501
The problem is I often find the rate exceeding the ceil which is 64kbit for 1:10 when I ran this
command:
tc -s show class dev eth1
I'm also using a script that captures the output of the above command and
feeds it to rrdtool to plot a graph of the usage and it also shows that the
bandwidth being utilised exceeds 64kbit.
How can ensure that this doesn't happen? Where did I go wrong with my
config?
Any help would be appreciated.
Thanks.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
