You can specify the source address
ip route add 192.168.66.0/24 via 192.168.1.2 src {The_Source_IP_of_interface}
Radek Vokál ([EMAIL PROTECTED]) schrieb:
>
> I have two IP for eth0 which correspond to eth0 and eth0:1
> I want to create a route
> to 192.168.66.0/24 via 192.168.0.50 from eth0:1
>
> so I add the route with
>
> ip route add 192.168.66.0/24 via 192.168.1.2 dev eth0:1
>
> but when I connect to 192.168.66.0/24 network in connects still using
> the IP of eth0, not the IP of eth0:1 as one would expect.
>
> What's strange to me is that ip route list dev eth0:1 shows same output
> as ip route list dev eth0
>
> is this expected behavior or is there a bug?
>
> Radek
>
>
> --
> Radek Vokál <[EMAIL PROTECTED]>
>
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
