Please see below Jon Flechsenhaar Boeing WNW Team Network Services (714)-762-1231 202-E7
-----Original Message----- From: Flechsenhaar, Jon J Sent: Wednesday, September 27, 2006 10:30 AM To: [email protected] Subject: FW: [LARTC] 2.6.14 - HTB/SFQ QoS broken? Please see below Jon Flechsenhaar Boeing WNW Team Network Services (714)-762-1231 202-E7 -----Original Message----- From: Flechsenhaar, Jon J Sent: Wednesday, September 27, 2006 9:35 AM To: [email protected] Subject: [LARTC] 2.6.14 - HTB/SFQ QoS broken? Jody: I don't know if you answer basic HTB questions but I'l try anyway. I'm implementing AF and EF with a root rate of 500 kbps (kilo bits per second). I am using DSMARK to classify packets. I'm implementing this on two different hardware sets PPC and x86 with the same kernel options configured. Problem: My root rate is going about 75 kbps over its 500kbps limit (ceil 500). I believe this is because of burst and cburst settings. I am using default calculations now, on all classes. Is there a formula to use in tweaking these values? I would like my rates to follow the assigned rate more closely. I am generating traffic with a hardware traffic generator. Starting at 300 kbps stepping by 100 kbps up to 1mbps. Each step lasts for 60 sec. My config script is attached. Thanks. Jon <<diffserv9-26-gred>> Jon Flechsenhaar Boeing WNW Team Network Services (714)-762-1231 202-E7
diffserv9-26-gred
Description: diffserv9-26-gred
_______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
