Hello Andy, How do one create such a filter to catch arp/other link layer traffic? Can you give us one such example?
Thanks, -nik ----- Original Message ----- From: "Andy Furniss" <[EMAIL PROTECTED]> To: "Roman Skula" <[EMAIL PROTECTED]> Cc: <[email protected]> Sent: Wednesday, January 17, 2007 10:18 PM Subject: Re: [LARTC] egress bandwidth not limited / limitedextremely inaccurately > Roman Skula wrote: > > Andy Furniss napisał(a): > > > >>Roman Skula wrote: > >> > >>>05:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5714 > >>>Gigabit Ethernet (rev a3) > >> > >>You may need to turn off segmentation offload with ethtool -k > > > > A huge, wet kiss for you, this turned my sky blue again. :) > > Lol - I forgot to mention: be carefull about using htb default, your > arp/other link layer end up there. If you don't specify a default htb > will let them through unshaped, you can make a filter to catch the > unclassified IP traffic and send it to the class you want. > > Andy. > > _______________________________________________ > LARTC mailing list > [email protected] > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
