Hello, I'm using these rules (attached) to control traffic going out from ip 192.168.0.100 which is acting as a p2p server, but when I have these rules on and mldonkey running I experience some latency in web pages, which Iwould like to eliminate. I've read that this is where the burst and cburst (even quantum) parameters are useful, but I still can't understand crearly how to set them (there are few examples using up rates of ~25kb/s), I hope you can check my rules and give me a hint on what to do.
Soluciones en español también aceptadas. Edgar Merino
#!/bin/sh ### Dispositivo de upload (externo) ### DEV=eth0 ### Bajar la cola the $DEV y el MTU### ip link set dev $DEV qlen 30 ip link set dev $DEV mtu 1000 ### BORRADO DE REGLAS Y CADENAS de la tabla mangle ### iptables -t mangle -F iptables -t mangle -X ## BORRADO DE ROOT QDISC EN $DEV tc qdisc del dev $DEV root ### IPTABLES RULES ### P2P_IP=192.168.0.100 SSH_PORT=9000 iptables -t mangle -A FORWARD -s $P2P_IP -o $DEV -j MARK --set-mark 1 iptables -t mangle -A OUTPUT -o $DEV -p tcp --sport $SSH_PORT -j MARK --set-mark 2 iptables -t mangle -A POSTROUTING -o $DEV -s ! $P2P_IP -m length --length :64 -j MARK --set-mark 3 ### CLASES ### SSH=1:10 P2P=1:20 ACK=1:40 DEF=1:30 ## HERE I USE $PARENT_RATE TO LIMIT BORROWING FROM P2P CLASS FROM PARENT, AND I PUT $MAX_RATE FOR LOW PRIO CLASSES SO THEY ALWAYS GET THE RATE THEY NEED (THIS TRICK SEEMS TO HELP) ## MAX_RATE=25kbps PARENT_RATE=10kbps P2P_UP=10kbps tc qdisc add dev $DEV root handle 1: htb default 30 tc class add dev $DEV parent 1: classid 1:1 htb rate $PARENT_RATE burst 6k cburst 3k tc class add dev $DEV parent 1:1 classid $P2P htb rate $P2P_UP ceil $P2P_UP burst 1k cburst 1k prio 2 tc class add dev $DEV parent 1:1 classid $SSH htb rate 5kbps ceil 10kbps burst 6k cburst 3k prio 0 ## Is this really needed? tc class add dev $DEV parent 1:1 classid $ACK htb rate $MAX_RATE ceil $MAX_RATE burst 6k cburst 3k prio 0 ## DEFAULT CLASS tc class add dev $DEV parent 1:1 classid $DEF htb rate $MAX_RATE ceil $MAX_RATE burst 6k cburst 3k prio 1 ### Se agregan qdisc sfq para garantizar un manejo de ancho de banda justo ### tc qdisc add dev $DEV parent $SSH handle 10: sfq perturb 10 tc qdisc add dev $DEV parent $DEF handle 30: sfq perturb 10 tc qdisc add dev $DEV parent $P2P handle 20: sfq perturb 10 ### Filtros para controlar el trafico marcado (especificamente, P2P y SSH) iptables -t mangle -A FORWARD -o $DEV -s $P2P_IP -m mark --mark 1 -j CLASSIFY --set-class $P2P iptables -t mangle -A OUTPUT -o $DEV -s ! $P2P_IP -m mark --mark 2 -j CLASSIFY --set-class $SSH iptables -t mangle -A POSTROUTING -o $DEV -s ! $P2P_IP -m mark --mark 3 -j CLASSIFY --set-class $ACK
_______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
