Dear List,
I am wanting to perform some traffic shaping as the subject of this email
suggests.
What I am wanting to do is this; I would like to have traffic shaping
performed on the following protocols: HTTP, RDP, GRE, PPTP, SIP and IAX.
Obviously I would like to have highest priority set for voice packets so
much so that the general http traffic does not impede on the voice packets.
I would like to have ample bandwidth available for RDP so that I am able to
connect to a remote site and not have too much lag but ample enough that
most tasks can be done. HTTP traffic would possibly have the lowest
priority of all the protocols that I have listed. So to clarify priority
would be something such as this:
1. IAX
2. SIP
3. GRE
4. PPTP
5. RDP
6. HTTP
I have a linux gateway that I will use for performing the traffic shaping
and is setup in the following way:
------------- ------------
---------
| ADSL | <----------> | LINUX | <----------> |
LAN |
------------- ------------
---------
I plan to have the ADSL router forward all traffic to the linux gateway
using something similar to a BIMAP rule where all incoming and outgoing
traffic is made to appear to come from the public IP address. I welcome any
and all suggestions but would possibly prefer the most elegant of solutions
J
Many thanks in advance
Rangi
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
