Hello,
I have a linux router, 2 internet access, 2 IP /24 ranges (as source
computers) and 3 interfaces cards.
(internet 2) 192.168.0.1 on eth0 [LINUX COMPUTER] 192.168.1.1 on eth1
(internet 1)
10.1.0.1 on eth2 (customers)
The Sources (customers) are:
10.20.0.0/24
10.30.0.0/24
I don't have IP on this ranges in my linux box. There is another router
under my linux box in my topology. But this customers arrives in my eth2
interface. I make SNAT fort his networks in my linux box.
The Gateways for internet access are:
192.168.0.254 on eth0
192.168.1.254 on eth1
I would like to have my customers of 10.20.0.0/24 going out for the internet
2 and the customers on 10.30.0.0/24 going out by the internet 1 (Eth1).
Thanks for any help in advance.
Pablo Fernandes
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
