Hi,
We have the following config:
Servers -> BGP router (10 Gbit)
-> BGP router (1 Gbit)
-> BGP router (100 mbit)
We would like to do the following.
The server should first fill the 100 mbit link, then fill the 1 Gbit link, and
then the 10 Gbit link, when traffic increases.
The resverse applies when traffic decreases.
I found lots of docs on round-robin weighted link, etc, but that would actually
load balance these links evenly.
We would like have it work like a bucket system though.
Any ideas?
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
