On 8/21/07, mangal regmi <[EMAIL PROTECTED]> wrote: > > Hi to all > i think this is not a new problem for this forum....but its newest for me > as i m a new linux lerner. Even if it is new plzz....reply me ur answer..n > if its already asked n have solution..plzz forward the solution. My problem > is here mentioned: > I have fedora core 4 as a linux server. there r two external links > connected to this.
I there are 2 external links, What is the file /etc/sysconfig/network like? Can you witre down the file? the settings are as: eth0 ->for internal (that is for LAN) > eth2 ->dsl connection > eth1 ->cable line connection( this connection > has no gateway and netmask address provided so this is connected via ppp0. > this is provided from ISP via DHCP but have the fixed ipaddress) Hey, What > is this FIXED ip address? Is it a perment address? > YOUR eth0 of Fedora Server is for internal (that is for LAN) YOUR eth2 of Fedora Server is connected to the dsl connection. YOUR eth1 of Fedora Server is connected to the cable line connection. It has a ip. i want to use these two link to provide the internet in my LAN where there > are about 8 to 10 computers. i want that if any of the link goes down ...the > other should continue the internet ...n also while both the links r up..the > load should be shared between these two links....so that the net conection > and downloads be faster.... > > i have heard about the scripts....that can do this....but i have no idea > how to write these...scripts. i need these to be on after reboot also... To come up the script after the reboot, There are two ways. Either you have to write everytning IN /etc/rc.d/rc.local or write the script as a seperate file and and make it executable by using chmod. Pls see bellow. first create the file as follows. touch /etc/rc.d/loadbalancing then , By using vi editor write the script and save it as usual. Then , Make it executable as follows. chmod 755 /etc/rc.d/loadbalancing and finally add PATH OF THE SCRIPT to /etc/rc.d/rc.local file as follows. etc/rc.d/loadbalancing That's it. Now, whenever you reboot the system, the scripts also comes up with the system. i tried my best and i also refered the lartc.org ..but i could do a little > only. > > WHAT I DID: it works very well if i connect both of the links and the > default path is via ppp0. but suppose if that is(ppp0) disconnected then > the dsl connection can handle only upto 15/16 seconds. after that it > disconnects . whats the solution ...plzz...as..soon > as..possible...help..me...i m in big trouble.... > UR SMALL HELP WILL BE A BIG BOON FOR ME COULD YOU PLS write down your RULES . then, I will be able to help you. Remember that i don't have gateway and netmask of eth1 connection. it has > ip address only.it is NATed via ppp0. and also my all working are based on > lartc.org only...in case of dsl connection i have just replaced the ip and > gateways with my ip and gateways....n in case of ppp0 conection i have put > ppp0 in the place of gateway n netmask and in place of ip i have given the > ip of that link. The above paragraph is not so clear. THANKS IN ADVANCE > > ------------------------------ > Luggage? GPS? Comic books? > Check out fitting gifts for > grads<http://us.rd.yahoo.com/evt=48249/*http://search.yahoo.com/search?fr=oni_on_mail&p=graduation+gifts&cs=bz>at > Yahoo! Search. > > > _______________________________________________ > LARTC mailing list > [email protected] > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > > -- Thank you Indunil Jayasooriya
_______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
