>The development config uses https://testopenid.dev/ as its OpenID provider, which is served by the same app that runs https://launchpad.dev/. Ok.
>Have you tried rebooting to ensure all config changes are in place? Yes before I emailed the mailing list. >What do the Apache logs say about the testopenid.dev request? Just read through the logs and did a search for testopenid.dev and there is no mention at all. >Are you using Ubuntu 12.04 LTS or 14.04 LTS on the server? I'm using 14.04.3 because it is the closest to Debian Jessie which is what I use on my machines. I would eventually like to get Launchpad running on Debian Jessie but I'm happy to work with Ubuntu 14.04 while I am learning about Launchpad. On 29 September 2015 at 15:57, William Grant <william.gr...@canonical.com> wrote: > On 29/09/15 15:37, Michael . wrote: > > I finished with Launchpad in VM (so I didn't inadvertently destroy a > > good working system) and I have sat down today and installed it on a > > production machine. > > There were a couple of hiccups along the way and each time I had a > > problem I worked through it till I got past that problem. I then > > reinstalled my system so it was totally new and up to date. > > The final time I got it running with no problems and the > > https://launchpad.dev page loads. I go to log in (I created a user > > michael and it had a generic email address given by > utilities/make-lp-user . > > I went to sign in and on the sign in page (https://launchpad.dev/+login) > > and I I get "OpenID Provider Is Unavailable at This Time > > The openid provider was unavailable. Please try again in a moment." (I > > have a screenshot if you want one). > > I try a few more times but keep getting the same message (which I > > figured I would). > > What's going on here? What isn't installed or working properly? > > I'm happy to do a clean install again because I want to get this working > > on my machine before I go any further. > > Cheers. > > Michael > > The development config uses https://testopenid.dev/ as its OpenID > provider, which is served by the same app that runs > https://launchpad.dev/. Have you tried rebooting to ensure all config > changes are in place? What do the Apache logs say about the > testopenid.dev request? Are you using Ubuntu 12.04 LTS or 14.04 LTS on > the server? > > > On 26 September 2015 at 18:22, Michael . <keltoi...@gmail.com > > <mailto:keltoi...@gmail.com>> wrote: > > > > Ah ok, just checked and it works. > > I'll use the old Makefile now and see what happens with rabbitmq. > > Thanks for your help. > > > > On 26 September 2015 at 15:58, William Grant > > <william.gr...@canonical.com <mailto:william.gr...@canonical.com>> > > wrote: > > > > On 26/09/15 15:28, Michael . wrote: > > > Correction, it doesn't tell me that rabbitmq has timed out. > > This is the > > > output the mare run stops at. > > > 2015-09-26 05:15:51 INFO Killing librarian (3150) > > > 2015-09-26 05:15:51 INFO Killing launchpad (3148) > > > bin/run -r librarian,google-webservice,memcached,txlongpoll \ > > > -i development > > > Removing stale pidfile /var/tmp/development-librarian.pid > > > ------ > > > 2015-09-26T15:15:58 WARNING root Developer mode is enabled: > > this is a > > > security risk and should NOT be enabled on production servers. > > Developer > > > mode can be turned off in etc/zope.conf > > > ------ > > > 2015-09-26T15:16:17 INFO Server zope.server.http (HTTP) > started. > > > Hostname: michael-RV411-RV511-E3511-S3511-RV711 > > > Port: 8085 > > > URL: http://michael-RV411-RV511-E3511-S3511-RV711:8085/ > > > ------ > > > 2015-09-26T15:16:17 INFO PMDBWSGIHTTPServer zope.server.http > > > (PostmortemDebuggingHTTP) started. > > > Hostname: michael-RV411-RV511-E3511-S3511-RV711 > > > Port: 8088 > > > URL: http://michael-RV411-RV511-E3511-S3511-RV711:8088/ > > > ------ > > > 2015-09-26T15:16:17 INFO Server zope.server.http > > (DebugLayerHTTP) started. > > > Hostname: michael-RV411-RV511-E3511-S3511-RV711 > > > Port: 8086 > > > URL: http://michael-RV411-RV511-E3511-S3511-RV711:8086/ > > > ------ > > > 2015-09-26T15:16:17 INFO Server zope.server.http > > (PrivateXMLRPC) started. > > > Hostname: michael-RV411-RV511-E3511-S3511-RV711 > > > Port: 8087 > > > URL: http://michael-RV411-RV511-E3511-S3511-RV711:8087/ > > > ------ > > > 2015-09-26T15:16:17 INFO root Startup time: 18.689 sec real, > > 10.549 sec CPU > > > > That means Launchpad is up and running successfully. If you've > used > > rocketfuel-setup, you should be able to browse to > > https://launchpad.dev/. > > > > But it took about twice as long to start as I would expect. I > > wouldn't > > try to run an appserver with less than 4GiB of RAM, though 2GiB > > might > > not be absolutely terrible if you're running 32-bit. > > > > > On 26 September 2015 at 15:26, Michael . <keltoi...@gmail.com > <mailto:keltoi...@gmail.com> > > > <mailto:keltoi...@gmail.com <mailto:keltoi...@gmail.com>>> > wrote: > > > > > > I have made a backup of the Makefile (Makefile.old) and > removed all > > > references do rabbitmq in the original file. Nothing > changes. > > > I'm starting to think some of this is a ram issue. How > much ram is > > > the recommended minimum for launchpad to build and run? > > > > > > On 26 September 2015 at 10:34, William Grant > > > <william.gr...@canonical.com > > <mailto:william.gr...@canonical.com> > > <mailto:william.gr...@canonical.com > > <mailto:william.gr...@canonical.com>>> > > > wrote: > > > > > > On 26/09/15 05:33, Michael . wrote: > > > > Sorry for the delay > > > > Clean install Ubuntu 14.04.3. Followed the process' > at > > > > https://dev.launchpad.net/Running Everything went as > > it should until > > > > make run where I got > > > > <lp.scripts.runlaunchpad.TxLongPollService object at > > 0x2ab851b3fc50> > > > > fixture details: > > > > (not ready yet?) > > > > Traceback (most recent call last): > > > > File "bin/run", line 26, in <module> > > > > > sys.exit(lp.scripts.runlaunchpad.start_launchpad()) > > > > File > > > > > > > "/home/michael/launchpad/lp-branches/devel/lib/lp/scripts/runlaunchpad.py", > > > > line 436, in start_launchpad > > > > with nested(*services): > > > > File "/usr/lib/python2.7/contextlib.py", line 17, > > in __enter__ > > > > return self.gen.next() > > > > File "/usr/lib/python2.7/contextlib.py", line 112, > > in nested > > > > vars.append(enter()) > > > > [... snip ...] > > > > Exception: Timeout waiting for RabbitMQ server to > > start: log in > > > > '/tmp/tmpJyCtsY/server.log'. > > > > make: *** [run] Error 1 > > > > > > michael@michael-RV411-RV511-E3511-S3511-RV711 > :~/launchpad/lp-branches/devel$ > > > > > > > > > > > > Checked logs and attached them to this > > > > message.tmpppg...@localhost-sasl.log is empty. > > > > > > > > So now rabbitmq is timing out and launchpad wont > start. > > > > > > It works fine for me on a fresh trusty system. Does > > everything > > > work if > > > you edit Makefile to remove rabbitmq from the list of > > services > > > to start? > > > It's not essential for basic usage. > > > > > > > Cheers. > > > > Michael. > > > > > > > > On 24 September 2015 at 20:08, Michael . > > <keltoi...@gmail.com <mailto:keltoi...@gmail.com> > > <mailto:keltoi...@gmail.com <mailto:keltoi...@gmail.com>> > > > > <mailto:keltoi...@gmail.com <mailto: > keltoi...@gmail.com> > > <mailto:keltoi...@gmail.com <mailto:keltoi...@gmail.com>>>> > wrote: > > > > > > > > Ok I will work on it tomorrow when my mind is > more alert. > > > > Thanks for your time and assistance, it is > appreciated. > > > > Cheers. > > > > Michael. > > > > > > > > On 24 September 2015 at 19:46, William Grant > > > > <william.gr...@canonical.com <mailto: > william.gr...@canonical.com> > > <mailto:william.gr...@canonical.com > > <mailto:william.gr...@canonical.com>> > > > <mailto:william.gr...@canonical.com > > <mailto:william.gr...@canonical.com> > > > <mailto:william.gr...@canonical.com > > <mailto:william.gr...@canonical.com>>>> > > > > wrote: > > > > > > > > On 24/09/15 19:32, Michael . wrote: > > > > > I am currently cleaning up my system. I > > will do a fresh install tomorrow > > > > > and post the results but as I said I have > > been able to get passed that > > > > > error and get stuck on a different error > > later on. The "librarian" and > > > > > now the rabbit time out is what I would > > like to work on as they are the > > > > > errors that are stopping me. > > > > > > > > The librarian error is fallout from the bad > > database setup. I've > > > > updated > > > > the manual instructions on the wiki (the > > problem you ran into was > > > > probably lack of IPv6 auth config), but you > > should work out why > > > > launchpad-database-setup is failing. It > > looks like the script is > > > > corrupt, or your /bin/sh is weird, or > > something similarly sinister. > > > > > > > > > On 24 September 2015 at 19:13, William > Grant > > > > > <william.gr...@canonical.com > > <mailto:william.gr...@canonical.com> > > <mailto:william.gr...@canonical.com > > <mailto:william.gr...@canonical.com>> > > > > <mailto:william.gr...@canonical.com > > <mailto:william.gr...@canonical.com> > > <mailto:william.gr...@canonical.com > > <mailto:william.gr...@canonical.com>>> > > > > <mailto:william.gr...@canonical.com > > <mailto:william.gr...@canonical.com> > > > <mailto:william.gr...@canonical.com > > <mailto:william.gr...@canonical.com>> > > > > <mailto:william.gr...@canonical.com > > <mailto:william.gr...@canonical.com> > > > <mailto:william.gr...@canonical.com > > <mailto:william.gr...@canonical.com>>>>> wrote: > > > > > > > > > > On 24/09/15 18:56, Michael . wrote: > > > > > > I have noticed that many things > > about LP see > > > to be aged > > > > but when that is > > > > > > what is available it is what people > > will use. > > > > > > Anyway, below is a copy of the > > output from a > > > new setup > > > > > > > > > > > > > > > michael@michael-RV411-RV511-E3511-S3511-RV711 > :~/launchpad/lp-branches/devel$ > > > > > > ./utilities/launchpad-database-setup > > michael > > > > > > <snip> > > > > > > * Starting PostgreSQL 9.3 database > > > > > > server > > > > > > [ OK ] > > > > > > Waiting 10 seconds for postgresql to > > come up... > > > > > > Creating postgresql user $ > > > > > > > > > > That's a bit suspicious; it should say > > "Creating > > > > postgresql user > > > > > michael". Can you paste the full > output of > > > > launchpad-database-setup? Is > > > > > your /bin/sh a symlink to a shell > > other than > > > dash or bash? > > > > > > > > > > William. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
_______________________________________________ Mailing list: https://launchpad.net/~launchpad-dev Post to : launchpad-dev@lists.launchpad.net Unsubscribe : https://launchpad.net/~launchpad-dev More help : https://help.launchpad.net/ListHelp
