On Thu, 10 Feb 2011 00:30:20 +0000, Paulo Costa <[email protected]> wrote:
>On 09/02/2011 23:12, Bo Berglund wrote: > >> I have tested the program now in the original development PC (a VMWare >> virtual XP-Pro machine) and my Win7X64 laptop and as long as I use a >> physical com port all seems to work OK. In the virtual machine it >> means mapping the laptop docking station COM1 into the VM. THen it >> works just fine. >> >> But when I involve a USB connected serial port (which I have to do if >> I undock my laptop) I get all kinds of strange errors, basically no >> communications at all! I have two different ones but both are >> problematic (ATEN RS232USB and SUNIX 4-port ComHub). >> >> Do you know of any problems related to SynaSer via USB connected RS232 >> adapters on Windows7 or WindowsXP? >> >> Right now I am moving the Lazarus application around to different >> computers (real and virtual) and different COM ports (real or USB >> connected) to try to figure out why it is so hard making it always >> work. And this is when I found that I tried ports that were already >> reserved for the virtual machine or actually unplugged without >> SdpoSerial saying anything about it.... > >Please test your ports with: > >http://paginas.fe.up.pt/~paco//AVR-IO-M16/M16_PC.zip > >and see if the problem also appears with this application. > >Paulo Costa Some questions: 1) How do I set the baudrate with this application? 2) What means "Server" and "Client" in the RS232 context? 3) Is there some form of use instruction too? I don't really understand it.... -- Bo Berglund Developer in Sweden -- _______________________________________________ Lazarus mailing list [email protected] http://lists.lazarus.freepascal.org/mailman/listinfo/lazarus
