Hello Marti,
I really appreciate your quick reply.
After I did like you suggested the Gamut Check is working.
Thanks a lot, and have a great day.
Best regards,
Ricardo
From: Marti Maria [mailto:marti.ma...@littlecms.com]
Sent: Wednesday, April 12, 2017 14:29
To: Sapaico-Valera, Ricardo
Cc: lcms-user@lists.sourceforge.net
Subject: Re: [Lcms-user] Check Out-of-gamut in Output CMYK Profile
Hi, you need to use the built-in lab identity for input and the formatter would
be TYPE_Lab_DBL,
Then instead of sRGB, put your CMYK profile. You may alsowant to check the
result with transicc.
Regards
Marti
On 12 Apr 2017 10:11, "Sapaico-Valera, Ricardo"
<ricardo.sapa...@oce.com<mailto:ricardo.sapa...@oce.com>> wrote:
Hello,
I have an output CMYK ICC profile, which I created using a printing RIP
software.
Using MATLAB, I can verify that in the ICC Profile Header:
Device Class=’output’
ColorSpace=’CMYK’
ConnectionSpace=’Lab
RenderingIntent = ‘Perceptual’
Version=’4.0.0’
Also, when I take a look at the ‘CLUT’ structures in the Profile, I can see
that they are in the uint16 format.
Using an ICC profile viewer, I am able to find out whether a Lab value is
inside or outside the gamut.
However, I would like to test programmatically whether a list (~1000) of Lab
values is inside or outside the gamut.
From what I found in the mailing list, I am using the following code:
---------------------------------------------------
cmsHPROFILE hInProfile, hNULL;
cmsHTRANSFORM xform;
cmsUInt16Number Alarm[16] = { 0xFF, 0xFF, 0xFF };
cmsSetAlarmCodes(Alarm);
hInProfile = cmsOpenProfileFromFile("MyICCProfile.icc", "r");
if (hInProfile == NULL) return 0; // Failed
hNULL = cmsCreateNULLProfile();
xform = cmsCreateProofingTransform(
hInProfile, // Input
TYPE_CMYK_16, // Input Format
hNULL, // Output
TYPE_GRAY_8, // Output Format
cmsCreate_sRGBProfile(), // Proofing
INTENT_RELATIVE_COLORIMETRIC, // Intent
INTENT_RELATIVE_COLORIMETRIC, // Proofing Intent
cmsFLAGS_GAMUTCHECK // Flags
);
cmsCIELab Lab1 = { 83.53, 5.35, 15.22 };
cmsCIELab Lab2 = { 12.75, -6.35, -2.32 };
cmsUInt8Number gamut;
cmsDoTransform(xform, &Lab1, &gamut, 1);
cmsDoTransform(xform, &Lab2, &gamut, 1);
cmsDeleteTransform(xform);
cmsCloseProfile(hInProfile);
cmsCloseProfile(hNULL);
---------------------------------------------------
Using the Profile Gamut viewer, I know that the value ‘Lab1’ is inside, and
‘Lab2’ is outside.
However, when I ran the code above, I get both of them as inside.
Next, I thought maybe if I changed the input to cmsDoTransform to be the
corresponding CMYK values it might work:
---------------------------------------------------
cmsUInt16Number CMYK1[4], CMYK2[4];
CMYK1[0] = 6553; CMYK1[1] = 13107; CMYK1[2] = 19660; CMYK1[3] = 0;
// C=10%, M=20%, Y=30%, K=0% -> should be in-gamut
CMYK2[0] = 52428; CMYK2[1] = 42597; CMYK2[2] = 42597; CMYK2[3] = 39321; //
C=80%, M=65%, Y=65%, K=60% -> should be out-of-gamut
---------------------------------------------------
But it didn’t help, and I still get “gamut=0” for both CMYK values (I even
tried with extreme values as C=M=Y=K=0% and C=M=Y=K=100%, to no avail).
I did some debugging and I found something it might help.
In ‘cmslut.c’, in the “_LUTeval16” function (lines 1294..1314), the variable
“lut->InputChannels” is 3;
however, I was expecting it to be 4, since I’m working with CMYK values.
Moreover, the correct 16-bit CMYK values are stored in the variable In[].
Could you please let me know what I am doing wrong?
I have the suspicion that my input to the ‘cmsDoTransform’ might not be ok; but
I cannot figure it out what else I could try.
Thank you very much in advance for your help.
Best regards,
Ricardo Sapaico
This message and attachment(s) are intended solely for use by the addressee and
may contain information that is privileged, confidential or otherwise exempt
from disclosure under applicable law. If you are not the intended recipient or
agent thereof responsible for delivering this message to the intended
recipient, you are hereby notified that any dissemination, distribution or
copying of this communication is strictly prohibited. If you have received this
communication in error, please notify the sender immediately by telephone and
with a 'reply' message. Thank you for your co-operation.
This message and attachment(s) are intended solely for use by the addressee and
may contain information that is privileged, confidential or otherwise exempt
from disclosure under applicable law. If you are not the intended recipient or
agent thereof responsible for delivering this message to the intended
recipient, you are hereby notified that any dissemination, distribution or
copying of this communication is strictly prohibited. If you have received this
communication in error, please notify the sender immediately by telephone and
with a 'reply' message. Thank you for your co-operation.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Lcms-user mailing list
Lcms-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/lcms-user
