Hi Everyone, I have a T5120 with corrupted iLOM images. I'm able to get into the u-boot prompt. I can download the iLOM image. But I need to know the correct addresses and env settings for the iLOM image that's included in patch 136932-04. If anyone can help me out, that would be awesome!
So basically, if someone has serial console access to one of these.. here are the steps to getting the info I'm looking for: 1. Make sure you have the 7.1.6 firmware from the above patch loaded and active. 2. Cleanly shutdown your box first:) 3. Power it off and then remove the physical power cords 4. Make sure you have an open serial connection to the SP 5. Plug in the power 6. When you see, "Booting linux in 5 seconds...", cut-n-paste "xyzzy". That will drop you to the u-boot loader prompt. 7. Capture the output from the following commands: imls printenv 8. Type "boot" to return to normal operations. Thanks again in advance! *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-* Octave J. Orgeron Solaris Systems Engineer http://www.opensolaris.org/os/community/sysadmin/ http://unixconsole.blogspot.com unixconsole at yahoo.com *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
