My understanding is you can not split bus on T5220.
D.
Devesh wrote:
> I am trying to assign the way manuals show to split the PCI bus across
> domains. On a T2000 one can see two buses but on a T5220 it shows only one
> see below
> ssisunt01 / > ldm list-constraints
> DOMAIN
> primary
>
> MAC
> 00:14:4f:97:ac:d4
>
> VCPU
> COUNT
> 16
>
> MAU
> COUNT
> 1
>
> MEMORY
> SIZE
> 8G
>
> VARIABLES
> nvramrc=." ChassisSerialNumber BEL07524HA " cr
> security-mode=none
> security-password=
>
> IO
> DEVICE OPTIONS
> pci at 0
> niu at 80
>
> VDS
> NAME VOLUME OPTIONS DEVICE
> primary-vds0 vol1
> /tech/LDOMs/ssisunt01_domain1
>
> VCC
> NAME PORT-RANGE
> primary-vcc0 5000-5003
>
> VSW
> NAME MAC NET-DEV DEVICE
> primary-vsw0 e1000g0 switch at 0
>
>
> ------------------------------------------------------------------------------
> DOMAIN
> domain1
>
> VCPU
> COUNT
> 16
>
> MEMORY
> SIZE
> 8G
>
> VARIABLES
> auto-boot?=true
> boot-device=/virtual-devices at 100/channel-devices at 200/disk at 0:a
> disk net
>
> NETWORK
> NAME SERVICE DEVICE MAC
> vnet1 primary-vsw0 network at 0
>
> DISK
> NAME VOLUME TOUT
> vdisk1 vol1 at primary-vds0
>
> VCONS
> NAME SERVICE PORT
> domain1 primary-vcc0 5000
>
> can someone help please
>
> Deepee
> --
> This message was posted from opensolaris.org
> _______________________________________________
> ldoms-discuss mailing list
> ldoms-discuss at opensolaris.org
> http://mail.opensolaris.org/mailman/listinfo/ldoms-discuss
>
