Liam, I have created another slice/partition 20GB size: (Cyl 30937--50212) (see below)
------------------------------------------------------------------------ --- partition> p Current partition table (original): Total disk cylinders available: 65533 + 2 (reserved cylinders) Part Tag Flag Cylinders Size Blocks 0 root wm 7711 - 22167 15.00GB (14457/0/0) 31458432 1 swap wu 0 - 7710 8.00GB (7711/0/0) 16779136 2 backup wm 0 - 65532 68.00GB (65533/0/0) 142599808 3 usr wm 22168 - 26117 4.10GB (3950/0/0) 8595200 4 home wm 26118 - 30936 5.00GB (4819/0/0) 10486144 5 unassigned wm 30937 - 50212 20.00GB (19276/0/0) 41944576 6 unassigned wm 0 0 (0/0/0) 0 7 unassigned wm 0 0 (0/0/0) 0 partition> -----Original Message----- From: Liam.Merwick at Sun.COM [mailto:[email protected]] Sent: Tuesday, February 05, 2008 10:15 AM To: Ballan, Roberto Cc: ldoms-discuss at opensolaris.org Subject: Re: [ldoms-discuss] Install/setting LDOM Guest Domains Hi Roberto, Ballan, Roberto wrote: > Hi Liam, > > gaxgpvw64xu# ldm ls -l > ======================================================================== > ======================================================================== > ======== > NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME > primary active -n-cv SP 4 4G 0.4% 4d 19h > 40m > <snip> > VDS > NAME VOLUME OPTIONS DEVICE > primary-vds0 vol1 /dev/dsk/c0t0d0s2 <snip> You are using c0t0d0s2 as the backing disk for your guest but this is already in use as the root disk for the control domain. I suggest doing the following, which will replace c0t0d0s2 with a file ldm stop ldg1 ldm unbind ldg1 ldm rm-vdsdev vol1 at primary-vds0 mkfile 4G /export/home/guest1disk.img ldm add-vdsdev /export/home/guest1disk.img vol1 at primary-vds0 ldm bind ldg1 ldm start ldg1 you should then be able to net install your guest. -- Liam > ======================================================================== > ===================================================== > -----Original Message----- > From: Liam.Merwick at Sun.COM [mailto:Liam.Merwick at Sun.COM] > Sent: Tuesday, February 05, 2008 9:52 AM > To: Ballan, Roberto > Cc: ldoms-discuss at opensolaris.org > Subject: Re: [ldoms-discuss] Install/setting LDOM Guest Domains > > Hi Roberto, > > Ballan, Roberto wrote: >> I have a T2000 Server with Solaris 10 installed. >> The T2000 has: 4GB RAM memory; 4 CPU (that is 4 core); 2 HBA's SUN >> Branded; >> And one NIC card. >> I have 2 internal disks that are h/w mirrored so if I run format I > can >> see >> A 68GB logical disk. (see below the format output). >> I am trying to find out the right steps/procedure in order to > install >> a >> Guest Domain. >> I have read the documentation in the LDOM Administration Guide > however >> I did not see all the steps in order to >> Install/configure a Guest Domain. >> Any help will be great. >> > > Can you include the output from 'ldm ls -l' of the guest you created and > are > having trouble with. > > In order to guest a guest domain you will need to do something like: > > mkfile 4G /export/home/guest1disk.img > ldm add-vdsdev /export/home/guest1disk.img file at primary-vds0 > ldm add-vdisk vdisk1 file at primary-vds0 guest1 > > Then 'bind' and 'start' the guest and Jumpstart the guest like you would > a bare-metal machine. Note, not all your disk below seems to be used, > you > could add a larger slice and put the file on that. > > -- Liam > > > >> Thanks. >> Roberto Ballan >> e-mail: x2ballan at southernco.com >> >> ======================================================= >> >> gaxgpvw64xu# format >> Searching for disks...done >> >> >> AVAILABLE DISK SELECTIONS: >> 0. c0t0d0 <LSILOGIC-LogicalVolume-3000 cyl 65533 alt 2 hd 16 > sec >> 136> >> /pci at 780/pci at 0/pci at 9/scsi at 0/sd at 0,0 >> Specify disk (enter its number): 0 >> selecting c0t0d0 >> [disk formatted] >> Warning: Current Disk has mounted partitions. >> /dev/dsk/c0t0d0s0 is currently mounted on /. Please see umount(1M). >> /dev/dsk/c0t0d0s1 is currently used by swap. Please see swap(1M). >> /dev/dsk/c0t0d0s3 is currently mounted on /usr/local. Please see >> umount(1M). >> /dev/dsk/c0t0d0s4 is currently mounted on /export/home. Please see >> umount(1M). >> >> >> FORMAT MENU: >> disk - select a disk >> type - select (define) a disk type >> partition - select (define) a partition table >> current - describe the current disk >> format - format and analyze the disk >> repair - repair a defective sector >> label - write label to the disk >> analyze - surface analysis >> defect - defect list management >> backup - search for backup labels >> verify - read and display labels >> save - save new disk/partition definitions >> inquiry - show vendor, product and revision >> volname - set 8-character volume name >> !<cmd> - execute <cmd>, then return >> quit >> format> p >> >> >> PARTITION MENU: >> 0 - change `0' partition >> 1 - change `1' partition >> 2 - change `2' partition >> 3 - change `3' partition >> 4 - change `4' partition >> 5 - change `5' partition >> 6 - change `6' partition >> 7 - change `7' partition >> select - select a predefined table >> modify - modify a predefined partition table >> name - name the current table >> print - display the current table >> label - write partition map and label to the disk >> !<cmd> - execute <cmd>, then return >> quit >> partition> p >> Current partition table (original): >> Total disk cylinders available: 65533 + 2 (reserved cylinders) >> >> Part Tag Flag Cylinders Size Blocks >> 0 root wm 7711 - 22167 15.00GB (14457/0/0) >> 31458432 >> 1 swap wu 0 - 7710 8.00GB (7711/0/0) >> 16779136 >> 2 backup wm 0 - 65532 68.00GB (65533/0/0) >> 142599808 >> 3 usr wm 22168 - 26117 4.10GB (3950/0/0) >> 8595200 >> 4 home wm 26118 - 30936 5.00GB (4819/0/0) >> 10486144 >> 5 unassigned wm 0 0 (0/0/0) >> 0 >> 6 unassigned wm 0 0 (0/0/0) >> 0 >> 7 unassigned wm 0 0 (0/0/0) >> 0 >> >> partition> > >
