Hi,
I am getting the following error while booting the guest domain:
WARNING: /virtual-devices at 100/channel-devices at 200/network at 0: Timeout
connecting to virtual switch... retrying
WARNING: /virtual-devices at 100/channel-devices at 200/network at 0: Unable to
connect to virtual switch
ERROR: boot-read fail
Can't open boot device
And here is the bindings:
Name: primary
State: active
Flags: transition,control,vio service
OS:
Util: 0.1%
Uptime: 4h 39m
Vcpu: 4
vid pid util strand
0 0 0.4% 100%
1 1 0.0% 100%
2 2 0.0% 100%
3 3 0.0% 100%
Mau: 1
mau cpuset (0, 1, 2, 3)
Memory: 4G
real-addr phys-addr size
0x8000000 0x8000000 4G
Vars: local-mac-address?=false
boot-device=disk
nvramrc=devalias net1 /pci at 7c0/pci at 0/network at 4,1
devalias net /pci at 7c0/pci at 0/network at 4
devalias net3 /pci at 7c0/pci at 0/pci at 8/network at 1,1
devalias net2 /pci at 7c0/pci at 0/pci at 8/network at 1
use-nvramrc?=true
service:=
primary-vsw0=
IO: pci at 780 (bus_a)
pci at 7c0 (bus_b)
Vldc: primary-vldc0
[LDC: 0x0]
[(HV Control channel)]
[LDC: 0x1]
[LDom primary (Domain Services channel)]
[LDC: 0x3]
[LDom primary (FMA Services channel)]
[LDC: 0xb]
[LDom myldom1 (Domain Services channel)]
Vldc: primary-vldc3
[LDC: 0x14]
[spds (SP channel)]
[LDC: 0xd]
[system-management (SP channel)]
[LDC: 0x6]
[sunvts (SP channel)]
[LDC: 0x7]
[sunmc (SP channel)]
[LDC: 0x8]
[explorer (SP channel)]
[LDC: 0x9]
[led (SP channel)]
[LDC: 0xa]
[flashupdate (SP channel)]
Vds: primary-vds0
vdsdev: vol1 device=/dev/dsk/c0t0d0s1
vdsdev: vol2 device=/dev/dsk/c0t0d0s2
[LDom myldom1, dev-name: vol1]
[LDC: 0xe]
Vcc: primary-vcc0
[LDC: 0xf]
[LDom myldom1, group: myldom1, port: 5000]
port-range=5000-5100
Vsw: primary-vsw0
mac-addr=0:14:4f:f9:41:96
net-dev=e1000g0
[LDC: 0xc]
[LDom myldom1, name: vnet1, mac-addr: 0:14:4f:f8:fd:25]
mode=prog,promisc
Vldcc: vldcc1 [FMA Services]
service: ldmfma
service: primary-vldc0 @ primary
[LDC: 0x4]
Vldcc: vldcc2 [SP channel]
service: spfma
[LDC: 0x5]
Vldcc: vldcc0 [Domain Services]
service: primary-vldc0 @ primary
[LDC: 0x2]
Vldcc: hvctl [Hypervisor Control]
service: primary-vldc0 @ primary
[LDC: 0x0]
Vcons: SP
------------------------------------------------------------------------
----
Name: myldom1
State: active
Flags: transition
OS:
Util: 100%
Uptime: 32m
Vcpu: 8
vid pid util strand
0 4 100% 100%
1 5 100% 100%
2 6 100% 100%
3 7 100% 100%
4 8 100% 100%
5 9 100% 100%
6 10 100% 100%
7 11 100% 100%
Memory: 4G
real-addr phys-addr size
0x8000000 0x108000000 4G
Vars: auto-boot?false=
auto-boot?=false
boot-device=/virtual-devices at 100/channel-devices at 200/disk at 0
nvramrc=devalias vnet0
/virtual-devices at 100/channel-devices at 200/network at 0
use-nvramrc?=true
Vldcc: vldcc0 [Domain Services]
service: primary-vldc0 @ primary
[LDC: 0x0]
Vnet: vnet1
mac-addr=0:14:4f:f8:fd:25
service: primary-vsw0 @ primary
[LDC: 0x1]
Vdisk: vdisk1 vol1 at primary-vds0
service: primary-vds0 @ primary
[LDC: 0x2]
Vcons: [via LDC:3]
myldom1 at primary-vcc0 [port:5000]
Can anyone help me out to figure out the problem. Is the virtual switch
need to be given from the "ifconfig" output or from the
"/etc/driver-aliases"
--Ashit
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://mail.opensolaris.org/pipermail/ldoms-discuss/attachments/20071010/f216f4f8/attachment.html>
