Alex,
It worked prefect.
I really appreciate your help.
In my case it is c0d6s2 since I have to reboot the Guest Domain.
Now everything looks fine.
alxapor03vd:/# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0d0 <SUN-DiskImage-58GB cyl 65533 alt 2 hd 1 sec 1856>
/virtual-devices at 100/channel-devices at 200/disk at 0
1. c0d1 <SUN-DiskImage-490GB cyl 65533 alt 2 hd 1 sec 15680>
/virtual-devices at 100/channel-devices at 200/disk at 1
2. c0d2 <SUN-DiskImage-75GB cyl 65533 alt 2 hd 1 sec 2400>
/virtual-devices at 100/channel-devices at 200/disk at 2
3. c0d3 <SUN-DiskImage-12GB cyl 41941 alt 2 hd 1 sec 600>
/virtual-devices at 100/channel-devices at 200/disk at 3
4. c0d4 <SUN-DiskImage-1GB cyl 3493 alt 2 hd 1 sec 600>
/virtual-devices at 100/channel-devices at 200/disk at 4
5. c0d5 <SUN-DiskImage-1GB cyl 3493 alt 2 hd 1 sec 600>
/virtual-devices at 100/channel-devices at 200/disk at 5
6. c0d6 <SUN-DiskImage-2GB cyl 6988 alt 2 hd 1 sec 600>
/virtual-devices at 100/channel-devices at 200/disk at 6
Specify disk (enter its number):
Thanks.
Roberto Ballan
e-mail: x2ballan at southernco.com
-----Original Message-----
From: Alexandre.Chartre at Sun.COM [mailto:[email protected]]
Sent: Tuesday, September 29, 2009 5:06 PM
To: Ballan, Roberto
Cc: ldoms-discuss at opensolaris.org
Subject: Re: [ldoms-discuss] LDOM issue/question - Solaris 10 LDOMs
Try to erase the disk label, like this:
# dd if=/dev/zero of=/dev/rdsk/c0d4s2 count=1
Then the disk should show up with the right size.
alex.
On 09/29/09 12:23, Ballan, Roberto wrote:
> I have VRTS SF Standard installed on the Control Domain (Solaris 10) and I
> have
> A Guest Domain Solaris 10 (alxapor03vd) that has bunch of VRTS Filesystems
> built.
> The disk c0d4s2 presented to the Guest Domain alxapor03vd is suppose to have
> size 2 GB
> NOT 10GB.
> Right now format shows 10 GB for the disk c0d4s2 because was
> implemented/created/exported
> With 10GB size.
> I am trying to find out the best way to clear-clean that LUN/disk c0d4s2 on
> the Guest Domain
> And re-export/make visible the new disk 2GB to the Guest domain alxapor03vd.
> In VRTS GUI VEA the LUN/disk shows 2 GB but in the Guest Domain format
> Shows 10GB. It looks like that for some reasons there somewhere "reference"
> to the OLD
> Size 10 GB of the disk.
> I have tried different commands but so far no luck, I still see the disk 10
> GB size.
> Please any suggestions will be great.
>
>
> ======================================================
> x2ballan at alxapor03vd:/home/x2ballan$ pg /etc/vfstab
> #device device mount FS fsck mount mount
> #to mount to fsck point type pass at boot
> options
> #
> fd - /dev/fd fd - no -
> /proc - /proc proc - no -
> /dev/dsk/c0d0s1 - - swap - no -
> /dev/dsk/c0d0s0 /dev/rdsk/c0d0s0 / ufs 1 no -
> /dev/dsk/c0d0s3 /dev/rdsk/c0d0s3 /usr/local ufs 2 yes
> -
> /dev/dsk/c0d0s4 /dev/rdsk/c0d0s4 /vol1 ufs 2 yes -
> /devices - /devices devfs - no -
> ctfs - /system/contract ctfs - no -
> objfs - /system/object objfs - no -
> swap - /tmp tmpfs - yes -
> sharefs - /etc/dfs/sharetab sharefs - no -
> #
> # APPLICATION FILESYSTEMS
> #
> /dev/dsk/c0d1s2 /dev/rdsk/c0d1s2 /oradir/slcrdb vxfs 2 yes
> delaylog,noatime,suid
> /dev/dsk/c0d2s2 /dev/rdsk/c0d2s2 /oraback/slcrdb vxfs 2 yes
> delaylog,noatime,suid
> /dev/dsk/c0d3s2 /dev/rdsk/c0d3s2 /oracle vxfs 2 yes delaylog,noatime,suid
> /dev/dsk/c0d5s2 /dev/rdsk/c0d5s2 /oraexp vxfs 2 yes delaylog,noatime,suid
> /dev/dsk/c0d6s2 /dev/rdsk/c0d6s2 /oratmp vxfs 2 yes delaylog,noatime,suid
> x2ballan at alxapor03vd:/home/x2ballan$
>
> ===============================================================
> alxapor03vd:/dev/rdsk# format
> Searching for disks...done
>
>
> AVAILABLE DISK SELECTIONS:
> 0. c0d0 <SUN-DiskImage-58GB cyl 65533 alt 2 hd 1 sec 1856>
> /virtual-devices at 100/channel-devices at 200/disk at 0
> 1. c0d1 <SUN-DiskImage-490GB cyl 65533 alt 2 hd 1 sec 15680>
> /virtual-devices at 100/channel-devices at 200/disk at 1
> 2. c0d2 <SUN-DiskImage-75GB cyl 65533 alt 2 hd 1 sec 2400>
> /virtual-devices at 100/channel-devices at 200/disk at 2
> 3. c0d3 <SUN-DiskImage-12GB cyl 41941 alt 2 hd 1 sec 600>
> /virtual-devices at 100/channel-devices at 200/disk at 3
> 4. c0d4 <SUN-DiskImage-10GB cyl 34950 alt 2 hd 1 sec 600>
> /virtual-devices at 100/channel-devices at 200/disk at 4
> 5. c0d5 <SUN-DiskImage-1GB cyl 3493 alt 2 hd 1 sec 600>
> /virtual-devices at 100/channel-devices at 200/disk at 5
> 6. c0d6 <SUN-DiskImage-1GB cyl 3493 alt 2 hd 1 sec 600>
> /virtual-devices at 100/channel-devices at 200/disk at 6
> Specify disk (enter its number):
> ============================================================
> alxapvm14xs# ldm list
> NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
> primary active -n-cv SP 4 1G 2.9% 60d 2h 43m
> alxapor03vd active -n--- 5001 4 6G 0.3% 26m
> alxapor04vt active -n--- 5002 4 4G 0.5% 1d 2m
> alxapwl20vs active -n--- 5000 8 8G 6.8% 60d 29m
> alxapvm14xs#
>
>
>
> ====================================================================
> alxapvm14xs# ldm list-bindings
> NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
> primary active -n-cv SP 4 1G 3.4% 60d 2h 42m
>
> MAC
> 00:14:4f:cf:e9:98
>
> VCPU
> VID PID UTIL STRAND
> 0 0 6.8% 100%
> 1 1 3.0% 100%
> 2 2 1.9% 100%
> 3 3 2.0% 100%
>
> MEMORY
> RA PA SIZE
> 0x8000000 0x8000000 1G
>
> VARIABLES
> boot-device=/pci at 0/pci at 0/pci at 2/LSILogic,sas at 0/disk at 0,0:a
> disk net
> keyboard-layout=US-English
> nvramrc=devalias vx-root_dg01 /pci at 0/pci at 0/pci at 2/LSILogic,sas at
> 0/disk at 0,0:a
> devalias vx-root_dg02 /pci at 0/pci at 0/pci at 2/LSILogic,sas at 0/disk at
> 1,0:a
>
> IO
> DEVICE PSEUDONYM OPTIONS
> pci at 0 pci
> niu at 80 niu
>
> VCC
> NAME PORT-RANGE
> primary-vcc0 5000-5100
> CLIENT PORT
> alxapwl20vs at primary-vcc0 5000
> alxapor03vd at primary-vcc0 5001
> alxapor04vt at primary-vcc0 5002
>
> VSW
> NAME MAC NET-DEV DEVICE MODE
> primary-vsw0 00:14:4f:fb:b2:bf e1000g0 switch at 0
> primary-vsw1 00:14:4f:fa:fe:c8 e1000g1 switch at 1
> primary-vsw4 00:14:4f:fa:b7:d9 e1000g4 switch at 2
> PEER MAC
> vnic4 at alxapwl20vs 00:14:4f:fa:01:e5
> NAME MAC NET-DEV DEVICE MODE
> primary-vsw5 00:14:4f:f9:22:6f e1000g5 switch at 3
> PEER MAC
> vnic5 at alxapor03vd 00:14:4f:f9:35:20
> NAME MAC NET-DEV DEVICE MODE
> primary-vsw2 00:14:4f:fa:72:64 e1000g2 switch at 4
> PEER MAC
> vnic2 at alxapor04vt 00:14:4f:fa:65:85
> NAME MAC NET-DEV DEVICE MODE
> primary-vsw3 00:14:4f:f8:b3:94 e1000g3 switch at 5
>
> VDS
> NAME VOLUME OPTIONS DEVICE
> primary-vds0 vol1
> /LDOMS/LDOM-ALXAPWL20VS/vdsk0_50gb.img
> vol2
> /LDOMS/LDOM-ALXAPOR03VD/vdsk0_58gb.img
> datadisk1
> /dev/vx/dsk/or03vd_slcrdb_lddg/slcrdb_vol
> datadisk2
> /dev/vx/dsk/or03vd_slcrdb_lddg/slcrdbbkup_vol
> datadisk3
> /dev/vx/dsk/or03vd_slcrdb_lddg/oracle_vol
> vol3
> /LDOMS/LDOM-ALXAPOR04VT/vdsk0_58gb.img
> datadisk5
> /dev/vx/dsk/or04vt_tembap3_lddg/oem_vol
> datadisk6
> /dev/vx/dsk/or04vt_tembap3_lddg/oracle_vol
> datadisk7
> /dev/vx/dsk/or04vt_tembap3_lddg/oraexp_vol
> datadisk8
> /dev/vx/dsk/or04vt_tembap3_lddg/oratmp_vol
> datadisk9
> /dev/vx/dsk/or04vt_tembap3_lddg/tembap3_vol
> datadisk10
> /dev/vx/dsk/or04vt_tembap3_lddg/tembap3bkup_vol
> datadisk4
> /dev/vx/dsk/or03vd_slcrdb_lddg/oem_vol
> datadisk11
> /dev/vx/dsk/or03vd_slcrdb_lddg/oraexp_vol
> datadisk12
> /dev/vx/dsk/or03vd_slcrdb_lddg/oratmp_vol
> CLIENT VOLUME
> vdisk1 at alxapwl20vs vol1
> vdisk2 at alxapor03vd vol2
> vdisk3 at alxapor03vd datadisk1
> vdisk4 at alxapor03vd datadisk2
> vdisk5 at alxapor03vd datadisk3
> vdisk7 at alxapor04vt vol3
> vdisk8 at alxapor04vt datadisk5
> vdisk9 at alxapor04vt datadisk6
> vdisk10 at alxapor04vt datadisk7
> vdisk11 at alxapor04vt datadisk8
> vdisk12 at alxapor04vt datadisk9
> vdisk13 at alxapor04vt datadisk10
> vdisk6 at alxapor03vd datadisk4
> vdisk14 at alxapor03vd datadisk11
> vdisk15 at alxapor03vd datadisk12
>
> VCONS
> NAME SERVICE PORT
> SP
>
> ------------------------------------------------------------------------------
> NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
> alxapor03vd active -n--- 5001 4 6G 0.5% 25m
>
> MAC
> 00:14:4f:fa:74:23
>
> VCPU
> VID PID UTIL STRAND
> 0 12 9.1% 100%
> 1 13 18% 100%
> 2 14 0.0% 100%
> 3 15 92% 100%
>
> MEMORY
> RA PA SIZE
> 0x8000000 0x248000000 6G
>
> VARIABLES
> auto-boot?=false
> boot-device=/virtual-devices at 100/channel-devices at 200/disk at 0:a
> disk net
> keyboard-layout=US-English
>
> NETWORK
> NAME SERVICE DEVICE MAC
> vnic5 primary-vsw5 at primary network at 0
> 00:14:4f:f9:35:20
> PEER MAC
> primary-vsw5 at primary 00:14:4f:f9:22:6f
>
> DISK
> NAME VOLUME TOUT DEVICE SERVER
> vdisk2 vol2 at primary-vds0 disk at 0 primary
> vdisk3 datadisk1 at primary-vds0 disk at 1 primary
> vdisk4 datadisk2 at primary-vds0 disk at 2 primary
> vdisk5 datadisk3 at primary-vds0 disk at 3 primary
> vdisk6 datadisk4 at primary-vds0 disk at 4 primary
> vdisk14 datadisk11 at primary-vds0 disk at 5 primary
> vdisk15 datadisk12 at primary-vds0 disk at 6 primary
>
> VCONS
> NAME SERVICE PORT
> alxapor03vd primary-vcc0 at primary 5001
>
> ------------------------------------------------------------------------------
> NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
> alxapor04vt active -n--- 5002 4 4G 0.6% 1d 2m
>
> MAC
> 00:14:4f:fb:27:16
>
> VCPU
> VID PID UTIL STRAND
> 0 16 10.0% 100%
> 1 17 29% 100%
> 2 18 0.0% 100%
> 3 19 86% 100%
>
> MEMORY
> RA PA SIZE
> 0x8000000 0x3c8000000 4G
>
> VARIABLES
> auto-boot?=false
> keyboard-layout=US-English
>
> NETWORK
> NAME SERVICE DEVICE MAC
> vnic2 primary-vsw2 at primary network at 0
> 00:14:4f:fa:65:85
> PEER MAC
> primary-vsw2 at primary 00:14:4f:fa:72:64
>
> DISK
> NAME VOLUME TOUT DEVICE SERVER
> vdisk7 vol3 at primary-vds0 disk at 0 primary
> vdisk8 datadisk5 at primary-vds0 disk at 1 primary
> vdisk9 datadisk6 at primary-vds0 disk at 2 primary
> vdisk10 datadisk7 at primary-vds0 disk at 3 primary
> vdisk11 datadisk8 at primary-vds0 disk at 4 primary
> vdisk12 datadisk9 at primary-vds0 disk at 5 primary
> vdisk13 datadisk10 at primary-vds0 disk at 6 primary
>
> VCONS
> NAME SERVICE PORT
> alxapor04vt primary-vcc0 at primary 5002
>
> ------------------------------------------------------------------------------
> NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
> alxapwl20vs active -n--- 5000 8 8G 6.1% 60d 28m
>
> MAC
> 00:14:4f:f9:fb:22
>
> VCPU
> VID PID UTIL STRAND
> 0 4 6.0% 100%
> 1 5 29% 100%
> 2 6 0.0% 100%
> 3 7 87% 100%
> 4 8 15% 100%
> 5 9 11% 100%
> 6 10 5.7% 100%
> 7 11 1.5% 100%
>
> MEMORY
> RA PA SIZE
> 0x8000000 0x48000000 8G
>
> VARIABLES
> auto-boot?=false
>
> NETWORK
> NAME SERVICE DEVICE MAC
> vnic4 primary-vsw4 at primary network at 0
> 00:14:4f:fa:01:e5
> PEER MAC
> primary-vsw4 at primary 00:14:4f:fa:b7:d9
>
> DISK
> NAME VOLUME TOUT DEVICE SERVER
> vdisk1 vol1 at primary-vds0 disk at 0 primary
>
> VCONS
> NAME SERVICE PORT
> alxapwl20vs primary-vcc0 at primary 5000
>
> alxapvm14xs#
>
>
>
> Thanks.
> Roberto Ballan
> e-mail: x2ballan at southernco.com
>
>
> _______________________________________________
> ldoms-discuss mailing list
> ldoms-discuss at opensolaris.org
> http://mail.opensolaris.org/mailman/listinfo/ldoms-discuss
