Trying to jumpstart guest1 and getting the following issues with the MAC
address... The jumpstart server and profiles are correct and has been used
previously.....
guest1
{0} ok banner
SPARC Enterprise T1000, No Keyboard
Copyright 2009 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.30.4, 2048 MB memory available, Serial #83373354.
Ethernet address 0:14:4f:f8:2d:2a, Host ID: 84f82d2a.
{0} ok boot vnet0 - install
SPARC Enterprise T1000, No Keyboard
Copyright 2009 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.30.4, 2048 MB memory available, Serial #876544.
Ethernet address 0:14:4f:f8:2d:2a, Host ID: 84f72d3a.
Boot device: /virtual-devices at 100/channel-devices at 200/network at 0 File
and
args: - install
Requesting Internet Address for 0:14:4f:fb:8a:31
Requesting Internet Address for 0:14:4f:fb:8a:31
Requesting Internet Address for 0:14:4f:fb:8a:31
Requesting Internet Address for 0:14:4f:fb:8a:31
bash-3.00# ldm list-bindings guest1
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
guest1 active -t---- 5000 4 2G 25% 5m
MAC
00:14:4f:f8:2d:2a
HOSTID
0x84f82d2a
CONTROL
failure-policy=ignore
DEPENDENCY
master=
VCPU
VID PID UTIL STRAND
0 8 100% 100%
1 9 0.0% 100%
2 10 0.0% 100%
3 11 0.0% 100%
MEMORY
RA PA SIZE
0x8000000 0x108000000 2G
VARIABLES
auto-boot?=false
boot-device=vdisk
nvramrc=devalias vnet0 /virtual-devices at 100/channel-devices at 200/network
at 0
use-nvramrc?=true
NETWORK
NAME SERVICE DEVICE MAC MODE PVID VID MTU
vnet0 primary-vsw0 at primary network at 0 00:14:4f:fb:8a:31 1 1500
PEER MAC MODE PVID VID MTU
primary-vsw0 at primary 00:14:4f:f9:58:54 1 1500
DISK
NAME VOLUME TOUT DEVICE SERVER MPGROUP
vdisk0 vol1 at primary-vds0 disk at 0 primary
VCONS
NAME SERVICE PORT
guest1 primary-vcc0 at primary 5000
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://mail.opensolaris.org/pipermail/ldoms-discuss/attachments/20100101/0f0e1779/attachment.html>
