i tried vxdiskadm also but no success  :-(


Select disk devices to add: [<pattern-list>,all,list,q,?] list

DEVICE       DISK         GROUP        STATUS
c0d0         -            -            online invalid
c0d1         -            -            error


Select an operation to perform: 1

Add or initialize disks
Menu: VolumeManager/Disk/AddDisks
  Use this operation to add one or more disks to a disk group.  You can
  add the selected disks to an existing disk group or to a new disk group
  that will be created as a part of the operation. The selected disks may
  also be added to a disk group as spares. Or they may be added as
  nohotuses to be excluded from hot-relocation use. The selected
  disks may also be initialized without adding them to a disk group
  leaving the disks available for use as replacement disks.

  More than one disk or pattern may be entered at the prompt.  Here are
  some disk selection examples:

  all:          all disks
  c3 c4t2:      all disks on both controller 3 and controller 4, target 2
  c3t4d2:       a single disk (in the c#t#d# naming scheme)
  xyz_0 :       a single disk (in the enclosure based naming scheme)
  xyz_ :        all disks on the enclosure whose name is xyz

Select disk devices to add: [<pattern-list>,all,list,q,?] list

DEVICE       DISK         GROUP        STATUS
c0d0         -            -            online invalid
c0d1         -            -            error

Select disk devices to add: [<pattern-list>,all,list,q,?] c0d1
  Here is the disk selected.  Output format: [Device_Name]

  c0d1

Continue operation? [y,n,q,?] (default: y)
  You can choose to add this disk to an existing disk group, a
  new disk group, or leave the disk available for use by future
  add or replacement operations.  To create a new disk group,
  select a disk group name that does not yet exist.  To leave
  the disk available for future use, specify a disk group name
  of "none".

Which disk group [<group>,none,list,q,?] (default: none)

Add site tag to disk? [y,n,q,?] (default: n)
  The disk will be initialized and left free for use as a replacement
  disk.

  c0d1

Continue with operation? [y,n,q,?] (default: y)
/usr/lib/vxvm/voladm.d/bin/disk.init: =device: not found
  This disk device is disabled (offline) and cannot be used.
  Output format: [Device_Name]

  c0d1

Hit RETURN to continue.
-- 
This message posted from opensolaris.org
_______________________________________________
ldoms-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/ldoms-discuss

Reply via email to