Update of /cvsroot/leaf/src/bering-uclibc4/source/radvd
In directory sfp-cvsdas-2.v30.ch3.sourceforge.com:/tmp/cvs-serv30173
Added Files:
buildtool.cfg buildtool.mk radvd-1.7.tar.gz radvd.conf
radvd.init
Log Message:
new upstream version 1.7
adds a lot more options and provides an option to check config syntax
--- NEW FILE: radvd-1.7.tar.gz ---
(This appears to be a binary file; contents omitted.)
--- NEW FILE: radvd.init ---
#! /bin/sh
RCDLINKS="0,K50 1,K50 2,S50 3,S50 4,S50 5,S50 6,K50"
PATH=/sbin:/bin:/usr/sbin:/usr/bin
DAEMON=/usr/sbin/radvd
NAME=radvd
DESC=radvd
CONFIG=/etc/radvd.conf
test -x $DAEMON || exit 0
set -e
# Check for IPv6 support in kernel
if test \! -e /proc/sys/net/ipv6; then
echo "IPv6 support must be enabled in the kernel for $DESC to work."
exit
fi
# We must enable IPv6 forwarding for radvd to work
echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
chkconfig() {
if [ ! -e $CONFIG ]; then
echo "$CONFIG does NOT exist." && exit 1
elif [ ! -s $CONFIG ]; then
echo "$CONFIG is empty." && exit 1
fi
}
case "$1" in
start)
echo -n "Starting $DESC: "
chkconfig
if ! start-stop-daemon --oknodo --start --pidfile /var/run/$NAME.pid \
--exec $DAEMON; then
echo "failed." && exit 1
fi
echo "$NAME."
;;
stop)
echo -n "Stopping $DESC: "
start-stop-daemon --oknodo --stop --pidfile /var/run/$NAME.pid \
--exec $DAEMON
echo "$NAME."
;;
reload|force-reload)
echo "Reloading $DESC configuration files."
start-stop-daemon --stop --signal 1 --quiet --pidfile \
/var/run/$NAME.pid --exec $DAEMON
;;
restart)
echo -n "Restarting $DESC: "
start-stop-daemon --stop --quiet --pidfile \
/var/run/$NAME.pid --exec $DAEMON
sleep 1
start-stop-daemon --start --quiet --pidfile \
/var/run/$NAME.pid --exec $DAEMON
echo "$NAME."
;;
*)
N=/etc/init.d/$NAME
echo "Usage: $N {start|stop|restart|reload|force-reload}" >&2
exit 1
;;
esac
exit 0
--- NEW FILE: buildtool.mk ---
# makefile for radvd
include $(MASTERMAKEFILE)
RADVD_DIR:=radvd-1.7
RADVD_TARGET_DIR:=$(BT_BUILD_DIR)/radvd
$(RADVD_DIR)/.source:
zcat $(RADVD_SOURCE) | tar -xvf -
# zcat $(RADVD_PATCH1) | patch -d $(RADVD_DIR) -p1
touch $(RADVD_DIR)/.source
source: $(RADVD_DIR)/.source
$(RADVD_DIR)/.configured: $(RADVD_DIR)/.source
(cd $(RADVD_DIR) ; CC=$(TARGET_CC) LD=$(TARGET_LD)
CFLAGS="$(BT_COPT_FLAGS)" \
./configure --sysconfdir=/etc --prefix=/usr --mandir=/usr/share/man )
touch $(RADVD_DIR)/.configured
$(RADVD_DIR)/.build: $(RADVD_DIR)/.configured
mkdir -p $(RADVD_TARGET_DIR)
mkdir -p $(RADVD_TARGET_DIR)/etc/init.d
mkdir -p $(RADVD_TARGET_DIR)/usr/sbin
make CC=$(TARGET_CC) -C $(RADVD_DIR)
-$(BT_STRIP) $(BT_STRIP_BINOPTS) $(RADVD_DIR)/radvd
cp -a $(RADVD_DIR)/radvd $(RADVD_TARGET_DIR)/usr/sbin
cp -a radvd.conf $(RADVD_TARGET_DIR)/etc
cp -a radvd.init $(RADVD_TARGET_DIR)/etc/init.d/radvd
cp -a $(RADVD_TARGET_DIR)/* $(BT_STAGING_DIR)
touch $(RADVD_DIR)/.build
build: $(RADVD_DIR)/.build
clean:
rm -rf $(RADVD_TARGET_DIR)
$(MAKE) -C $(RADVD_DIR) clean
rm -f $(RADVD_DIR)/.build
rm -f $(RADVD_DIR)/.configured
srcclean: clean
rm -rf $(RADVD_DIR)
rm -f $(RADVD_DIR)/.source
--- NEW FILE: buildtool.cfg ---
<File buildtool.mk>
Server = cvs4-sourceforge
Revision = HEAD
Directory = radvd
</File>
<File radvd-1.7.tar.gz>
Server = cvs4-sourceforge
Revision = HEAD
envname = RADVD_SOURCE
Directory = radvd
</File>
<File radvd.init>
Server = cvs4-sourceforge
Revision = HEAD
Directory = radvd
</File>
<File radvd.conf>
Server = cvs4-sourceforge
Revision = HEAD
Directory = radvd
</File>
<Package>
<radvd>
Version = 1.7
Revision = 1
Help <<EOF
Linux IPv6 Router Advertisement Daemon (radvd)
Homepage: http://www.litech.org/radvd
LEAF package by __PACKAGER__, __BUILDDATE__
Radvd comes with a default configuration in /etc/radvd.conf
that advertises
site-local (fec0::/64) addresses on eth0. If you want to use
other addresses
or another interface, please change radvd.conf to your needs.
Furthermore, radvd needs IPv6 forwarding enabled (setting
/proc/sys/net/ipv6/conf/all/forwarding to 1) so this is done in
the init
script.
If starting radvd fails, please have a look at /var/log/syslog,
since radvd
doesn't output startup failures to the terminal.
EOF
<Permissions>
Files = 644
Directories = 755
</Permissions>
<Owner>
Files = root:root
Directories = root:root
</Owner>
<Contents>
<File>
Source = usr/sbin/radvd
Filename = usr/sbin/radvd
Type = binary
Permissions = 755
</File>
<File>
Source = etc/init.d/radvd
Filename = etc/init.d/radvd
Type = binary
Permissions = 755
</File>
<File>
Source = etc/radvd.conf
Filename = etc/radvd.conf
Description = radvd configuration file
Type = binary
Type = conf
Type = local
</File>
</Contents>
</radvd>
</Package>
--- NEW FILE: radvd.conf ---
interface eth0
{
AdvSendAdvert on;
prefix fec0::/64
{
};
};
------------------------------------------------------------------------------
Protect Your Site and Customers from Malware Attacks
Learn about various malware tactics and how to avoid them. Understand
malware threats, the impact they can have on your business, and how you
can protect your company and customers by using code signing.
http://p.sf.net/sfu/oracle-sfdevnl
_______________________________________________
leaf-cvs-commits mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/leaf-cvs-commits
