Hi, Thanks for the speedy reply.
I have a list of things that I want to do. 1. Install (modify if necessary) the Soekris error LED driver. 2. Develop a Cisco IOS like interface for config. 3. Add MAC based bandwidth management. 4. Add protocol blocking to config 5. Remote interface/cpe stats to remote server 6. Serial based bin file update. 7. Network based bin file update. 8. Some type of antenna alignment feedback strategy. Actually that brings up another question. Shouldn't I be able to prepare a binary image of the readonly portion of the flash and update it on the fly while wisp-dist is running? Thanks, Gerry -----Original Message----- From: Vladimir Ivaschenko [mailto:[EMAIL PROTECTED] Sent: Monday, December 15, 2003 12:39 PM To: Gerry Weaver Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: [leaf-devel] wisp-dist build environment Gerry Weaver wrote: > Hi, > > First let me say... Thanks very much for your help. I feel like I'm trying > to drink from a fire hose! > > 1. Does this happen in your build? I'm using the src-kernel-2.4.20.tar.gz > from your site. Module errors? No. > > 2. I've got a Soekris 4521 and the Netgate(Senaou) 200mW PCMCIA card. > > 3. Can I just install the latest uClibc distro? > > 4. There are 3 busybox directories (***-boot, ***-dyn, ***-min). Do I need > to build all of these? Actually you don't have to build them at all if you don't want to modify them. Can you tell me what you want to be done? This is the easiest way to approach the problem. > > 5. I'm trying to understand the proper sequence for building an image. > > a) build kernel > b) build modules > c) populate modules > d) build user-progs only required if you have changed something > e) mount-wcpe > f) prepare-image > g) unmount-wcpe > > Is this correct? > > > > Thanks Again, > Gerry > > > > > -----Original Message----- > From: Vladimir Ivaschenko [mailto:[EMAIL PROTECTED] > Sent: Monday, December 15, 2003 6:45 AM > To: Gerry Weaver > Cc: [EMAIL PROTECTED] > Subject: Re: [leaf-devel] wisp-dist build environment > > > > >>1. I've been able to compile the kernel and modules (2.4.20), but when I > > do > >>a "make modules_install" I get the following unresolved symbols. Any >>suggestions? >> >>/lib/modules/2.4.20/kernel/drivers/mtd/maps/sc520cdp.o >> >>mtd_concat_destroy and mtd_concat_create >> >>/lib/modules/2.4.20/kernel/drivers/net/wan/comx.o > > > Though I don't know what's causing that, I believe they can be ignored. > > >>/lib/modules/2.4.20/pcmcia/host_apcs.o >> >>register_pccard_driver, unregister_pccard_driver, and CardServices >> >>I am building from the ..../linux-dist directory > > > Can you tell me what do you run exactly? Note that built-in kernel > PCMCIA is not used, pcmcia-cs-3.2.3 is used instead. > > >>2. When I try to build busybox I get errors related to uClibc. Is that > > what > >>it's supposed to link against or do I need to point the makefile to the >>libraries installed in the root_fs_woody file system? > > > uClibc-based busybox is used only for initial boot in initrd. > If you want to change something, you have to install uClibc. Please > note that it doesn't have anything common > with other uClibc-based LEAF variants. > > -- > Best Regards, > Vladimir Ivaschenko > Thunderworx - Senior Systems Engineer (RHCE) > > -- Best Regards, Vladimir Ivaschenko Thunderworx - Senior Systems Engineer (RHCE) ------------------------------------------------------- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click _______________________________________________ leaf-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-devel
