WRAP is one of the recent embeded boards that use an NS Geode processor. Since it
loads syslinux and the kernel itself from the same CF card, that path is working
before LINUXRC gets to load the root, etc, var, ... LRPs. So it must be something
related to the driver or similar.
Thorsten
At 01:32 PM 10/7/2004 -0700, Thorsten von Eicken wrote:
>I'm having difficulties with the loading of LRPs at boot time (i.e. the ones listed
>in syslinux.cfg) using Bering uClibc. I have a WRAP board with a 1GB IBM microdrive.
>The symptom is that about 50% of the cases everything is fine, and 50% LINUXRC shows
>"root.lrp (nf!)" and so on for all LRPs. The result is that I have to power cycle the
>board 2-3 times to get it to boot. When it comes up properly everything is fine and
>further operations on the drive have no problems (I mount the drive and use it a
>lot). Is this due to the microdrive? Has anyone else observed this? Any ideas on how
>to fix it?
>Thanks much!
> Thorsten - Santa Barbara
>
>
>
>-------------------------------------------------------
>This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
>Use IT products in your business? Tell us what you think of them. Give us
>Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
>http://productguide.itmanagersjournal.com/guidepromo.tmpl
>
>_______________________________________________
>leaf-devel mailing list
>[EMAIL PROTECTED]
>https://lists.sourceforge.net/lists/listinfo/leaf-devel
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
leaf-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-devel
