Am Donnerstag, 24. Juni 2010 15:27:08 schrieb Andrew: > > It solved the build pb's; unfortunatley I'm not able to boot from an IDE > > CF disk. > > > > The error I see is: > > > > LINUXRC: Bering - Initrd - 4.0.0 Rev 8 uClibc 0.9.30.3 > > [ 1.679028] SCSI subsystem initialized > > [ 2.027591] usbcore: registered new interface driver usbfs > > [ 2.037774] usbcore: registered new interface driver hub > > [ 2.044838] usbcore: registered new device driver usb > > [ 2.065189] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > > [ 2.075893] ohci_hcd 0000:00:0f.4: OHCI Host Controller > > [ 2.076635] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned > > bus number 1 > > [ 2.088773] ohci_hcd 0000:00:0f.4: irq 15, io mem 0xefffe000 > > [ 2.174051] usb usb1: configuration #1 chosen from 1 choice > > [ 2.185534] hub 1-0:1.0: USB hub found > > [ 2.185534] hub 1-0:1.0: 4 ports detected > > [ 2.222875] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > > [ 2.232084] Warning! ehci_hcd should always be loaded before uhci_hcd > > and ohci_hcd, not after > > [ 2.241631] ehci_hcd 0000:00:0f.5: EHCI Host Controller > > [ 2.247743] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned > > bus number 2 > > [ 2.282635] ehci_hcd 0000:00:0f.5: irq 15, io mem 0xefffd000 > > [ 2.288451] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00 > > [ 2.295402] usb usb2: configuration #1 chosen from 1 choice > > [ 2.302235] hub 2-0:1.0: USB hub found > > [ 2.302945] hub 2-0:1.0: 4 ports detected > > LINUXRC: Installing - root: root(nf!) config: config(nf!) etc: > > etc(nf!) modules: modules(nf!) dropbear: dropbear(nf!) . > > /init: source: line 309: can't open '/var/lib/lrpkg/root.dev.own' > > [ 3.433366] Kernel panic - not syncing: Attempted to kill init! > > > > > > This is usually a pb, when initrd can't find the media with the packages. > > > > The syslinux.cfg I use (this is a dual boot setup for CF) looks like > > this: > > > > kernel linux26 > > append initrd=initrd26.lrp root=/dev/ram0 rw console=ttyS0,115200n8 > > LEAFCFG=/dev/sda2:msdos PKGPATH=/dev/sda2:msdos > > LRP=root,config,etc,modules,dropbear > > > > I also tried the shorter one > > kernel linux26 > > append initrd=initrd26.lrp root=/dev/ram0 rw console=ttyS0,115200n8 > > LEAFCFG=/dev/sda2:msdos > > > > kp > > Can you look what device driver is actually use your IDE controller? If > earlier build with unconditional loading of all initrd modules works for > you, can you run `cat /sys/class/scsi_host/*/proc_name` and tell me result? > Also I've added ata_generic to initrd, try to reassemble it and run - > possible it'll work if there is no ATA drivers will be loaded by autoload.
I use the pata_amd to boot successfully- added that (and others) in the meantime. Will have a look if it works with just a generic driver later this week. The cpio initrd is indeed better to work with! kp ------------------------------------------------------------------------------ ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo _______________________________________________ leaf-devel mailing list leaf-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-devel
