25.06.2010 22:17, KP Kirchdoerfer пишет: > Am Freitag, 25. Juni 2010 21:09:06 schrieb Andrew: > >> 25.06.2010 21:45, KP Kirchdoerfer пишет: >> >>> Am Freitag, 25. Juni 2010 15:26:55 schrieb Andrew: >>> >>>> I've added iterational module loading during boot - if after modprobe >>>> there are new modaliases appears, modprobe sequence will be repeated. >>>> Try it now. >>>> >>> I replaced initrd and modules (keeped modules.conf though) but it only >>> starts with KMODULES=pata_amd on the init line; so the automated >>> detection still seems to fail... >>> >>> I'll doublecheck tomorrow, sometimes it's a question of being too >>> tired... >>> >> Ok, I'll add some debug code, to see what is really doing on your system >> in each iteration of hardware detection. >> > ok > > Done. For debug activation, add VERBOSE=1 to kernel parameters. And send me /linuxrc.* files from distro root >>> Maybe you can setup a environment, where you can check with qemu - like >>> the iso image...? Having such an environment at hand, will help us anyway >>> in the future. >>> >> I test each modification under virtualbox - and all is OK. >> > Sorry, no harm intended. > > Do you see something like the lines between "SCSI subsystem initialized" > and "usbcore..." > > Without the KMODULES at init I see nothing, with, I see the drivers for the > harddisk: > > [ 1.628231] SCSI subsystem initialized > [ 1.813497] libata version 3.00 loaded. > [ 1.834004] pata_amd 0000:00:0f.2: version 0.4.1 > [ 1.834004] scsi0 : pata_amd > [ 1.843158] scsi1 : pata_amd > [ 1.843158] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 > [ 1.854679] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 > [ 2.033728] ata1.00: CFA: CF 128MB, 06/07/29, max PIO4 > [ 2.034170] ata1.00: 256512 sectors, multi 0: LBA > [ 2.051296] ata1.00: configured for PIO4 > [ 2.063490] ata1.00: configured for PIO4 > [ 2.063952] ata1: EH complete > [ 2.070908] scsi 0:0:0:0: Direct-Access ATA CF 128MB 06/0 > PQ: 0 ANSI: 5 > [ 2.080027] ata2: port disabled. ignoring. > [ 2.278276] sd 0:0:0:0: [sda] 256512 512-byte logical blocks: (131 MB/125 > MiB) > [ 2.290490] sd 0:0:0:0: [sda] Write Protect is off > [ 2.298991] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 2.299125] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, > doesn't support DPO or FUA > [ 2.309266] sda: sda1 sda2 > [ 2.315875] sd 0:0:0:0: [sda] Attached SCSI removable disk > [ 2.464283] usbcore: registered new interface driver usbfs > > kp > > Yes, I see hard drives initialising (ata_piix module) and successful system loading.
P.S. It looks that busybox's modprobe poorly handles long alias list - it doesn't load usb-libusual.ko by alias `usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00` and show no error, just silently returns to shell - when in modules.dep.bb there is corresponding line... But even it must handle pata_amd by alias - I've checked, it'll work on my VM. ------------------------------------------------------------------------------ ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo _______________________________________________ leaf-devel mailing list leaf-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-devel
