Hi David, Thanks for your response etc, I had no luck second time around on Ubuntu, seems there is a bug in buildtool on Ubuntu 10 x64. (I was never able to get builtool to work correctly on debian either with the earlier release of Bering).
I just run up a quick Fedora 14 x64 box, and ran buildtool, no issues at all. This will get my by for now, but would still like to be able to stick to my favourite flavour of nix ;) If there is anything/info I can help with to make it work on Ubuntu happy to help. Thanks again. Ad -----Original Message----- From: davidMbrooke [mailto:dmb.leaf-de...@ntlworld.com] Sent: Thursday, 3 February 2011 10:10 AM To: ads...@genis-x.com Cc: leaf-devel@lists.sourceforge.net Subject: RE: [leaf-devel] Buildtool with cvs down etc On Thu, 2011-02-03 at 08:37 +1100, ads...@genis-x.com wrote: > Hi, > > I was under the impression the new bering didn't have the old issues > of being tied to a certain gcc. Bering-uClibc 4.x is much less fussy about GCC versions than before, although GCC 3 probably won't work anymore. GCC 4.4.3 should be fine. I am using GCC 4.5.1 now but I used 4.4.x until a few weeks ago. > I'm running Ubuntu-10.04.1 with latest apt-get upgrade > > gcc --version > > gcc (Ubuntu 4.4.3-4ubuntu5) 4.4.3 > Copyright (C) 2009 Free Software Foundation, Inc. > This is free software; see the source for copying conditions. There > is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. > > I noticed at the start of the uclibc build the command not found > errors? Is this expected? I have these same errors in buildtoollog (with a successful build) so they seem to be harmless. > MKDIR include/config > /bin/sh: > /home/leaf/leaf/bering-uclibc4/buildtool/staging/bin/i486-pc-linux-ucl > ibc-gc > c: not found > make[2]: > /home/leaf/leaf/bering-uclibc4/buildtool/staging/bin/i486-pc-linux-ucl > ibc-gc > c: Command not found > make[2]: > /home/leaf/leaf/bering-uclibc4/buildtool/staging/bin/i486-pc-linux-ucl > ibc-gc > c: Command not found > gcc -DCURSES_LOC="<curses.h>" -DLOCALE -MM *.c > .depend 2>/dev/null || : > /bin/sh: > /home/leaf/leaf/bering-uclibc4/buildtool/staging/bin/i486-pc-linux-ucl > ibc-gc > c: not found > make[2]: > /home/leaf/leaf/bering-uclibc4/buildtool/staging/bin/i486-pc-linux-ucl > ibc-gc > c: Command not found > make[2]: > /home/leaf/leaf/bering-uclibc4/buildtool/staging/bin/i486-pc-linux-ucl > ibc-gc > c: Command not found > gcc -DCURSES_LOC="<curses.h>" -DLOCALE -c conf.c -o conf.o > gcc -DCURSES_LOC="<curses.h>" -DLOCALE -c kxgettext.c -o kxgettext.o > cat zconf.tab.c_shipped > zconf.tab.c > cat lex.zconf.c_shipped > lex.zconf.c > cat zconf.hash.c_shipped > zconf.hash.c > gcc -DCURSES_LOC="<curses.h>" -DLOCALE -I. -c zconf.tab.c -o zconf.tab.o > gcc -DCURSES_LOC="<curses.h>" -DLOCALE conf.o zconf.tab.o -o conf > # > # configuration written to .config > # > make[1]: Leaving directory > `/home/leaf/leaf/bering-uclibc4/buildtool/source/buildenv/uClibc-0.9.30.3' > make -j1 -C > /home/leaf/leaf/bering-uclibc4/buildtool/source/buildenv/uClibc-0.9.30.3 \ > PREFIX=/home/leaf/leaf/bering-uclibc4/buildtool/staging/ \ > CROSS_COMPILER_PREFIX="" \ > DEVEL_PREFIX=/ CC=gcc \ > RUNTIME_PREFIX=/ \ > pregen install_dev; I get different output in the log around where you get the fatal error. I get: AR cr lib/libpthread.a STRIP -x -R .note -R .comment lib/libpthread.a LD ld-uClibc-0.9.30.3.so AR cr libc/libc_so.a STRIP -x -R .note -R .comment libc/libc_so.a make[2]: `lib/ld-uClibc.so' is up to date. LD libuClibc-0.9.30.3.so LD libdl-0.9.30.3.so so it is definitely behaving differently on your system. All I can suggest is that you re-run the git clone and try again with a clean download, and if that has the same problem check for any other errors in the log. Andrew is much more of an expert on the buildenv than I am, so he may have some other suggestions. Does anybody else have a successful build on 64-bit Ubuntu 10? dMb > > -----Original Message----- > From: davidMbrooke [mailto:dmb.leaf-de...@ntlworld.com] > Sent: Thursday, 3 February 2011 7:57 AM > To: leaf-devel > Subject: Re: [leaf-devel] Buildtool with cvs down etc > > On Wed, 2011-02-02 at 20:13 +1100, ads...@genis-x.com wrote: > > I should have added, > > Base machine is Ubuntu 2.6.32-24-server #43-Ubuntu SMP Thu Sep 16 > > 16:05:42 UTC 2010 x86_64 GNU/Linux > > > > -----Original Message----- > > From: ads...@genis-x.com [mailto:ads...@genis-x.com] > > Sent: Wednesday, 2 February 2011 5:16 PM > > To: leaf-devel@lists.sourceforge.net > > Subject: Re: [leaf-devel] Buildtool with cvs down etc > > > > Hey guys, > > > > I git clone'd the lastest buildtool and hit a snag. > > > > > > downloading: .config from server leaf4-sourceforge type gitweb > > [0.K.] > > downloading: 50_all_gcc44_no_ssp_tls_uclibc.patch from server > > leaf4-sourceforge type gitweb [0.K.] > > downloading: uClibc-0.9.30.3.tar.bz2 from server uclibc.org type > > http [0.K.] calling 'make source' for buildenv make source failed > > for > > /home/leaf/leaf/bering-uclibc4/buildtool/source/buildenv/buildtool.m > > k , please have a look at the logfile log/buildtoollog at > > buildtool/Make/Source.pm line 398. > > > > The log > > CC libc/misc/elf/dl-iterate-phdr.os > > CC libc/misc/internals/__uClibc_main.os > > CC libc/inet/rpc/rpc_thread.os > > CC libc/stdlib/atexit.os > > AR cr lib/libc.a > > STRIP -x -R .note -R .comment lib/libc.a > > AR cr lib/uclibc_nonshared.a > > STRIP -x -R .note -R .comment lib/uclibc_nonshared.a > > AR cr libc/libc_so.a > > STRIP -x -R .note -R .comment libc/libc_so.a > > LD libuClibc-0.9.30.3.so > > libc/libc_so.a(lldiv.os): In function `imaxdiv': > > lldiv.c:(.text.lldiv+0x32): undefined reference to `__divdi3' > > lldiv.c:(.text.lldiv+0x4e): undefined reference to `__moddi3' > > collect2: ld returned 1 exit status > > make[1]: *** [lib/libc.so] Error 1 > > make[1]: Leaving directory > > `/home/leaf/leaf/bering-uclibc4/buildtool/source/buildenv/uClibc-0.9.30.3' > > make: *** > > [/home/leaf/leaf/bering-uclibc4/buildtool/source/buildenv/uClibc-0.9 > > .3 > > 0.3/.c > > onfigured] Error 2 > > make: Leaving directory > > `/home/leaf/leaf/bering-uclibc4/buildtool/source/buildenv' > > > > Not sure if I've missed something in the config > > > > Any ideas? > > > > Cheers > > Ad > > Hi Ad, > > A git clone of the latest buildtool works OK for me, on Fedora 14 > (2.6.35.10-74.fc14.x86_64). > > Which version of GCC do you have? > > davidMbrooke ------------------------------------------------------------------------------ Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)! Finally, a world-class log management solution at an even better price-free! Download using promo code Free_Logger_4_Dev2Dev. Offer expires February 28th, so secure your free ArcSight Logger TODAY! http://p.sf.net/sfu/arcsight-sfd2d _______________________________________________ leaf-devel mailing list leaf-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-devel
