I'm running Eigerstein on 1.6MB floppy with the VPNMasq Kernal.
I've decided to run a simple FTP server inside my firewall. I have to
have this working by tomorrow mid-day -- giving a little presentation
and have to have an FTP site to download off of. Everybody's problems
related to FTP seemed to be re: Passive, so I figured that Active was
easy to configure...guess sometimes not. I made the change to the
"INTERN_FTP_SERVER" to the correct IP and uncommented it. (This is what
I did to forward SSH to the internal ssh server -- uncomment the
INTERN_SSH_SERVER variable and set the IP...and it works perfectly.
However, when I try to FTP to the IP of the LRP from an entirely
different network (I have 2 DSL drops from two separate ISP's), I get a
timeout on the ftp:
C:\WINNT>ftp 64.255.208.60
> ftp: connect :Connection timed out
ftp> quit
From inside the LRP, I'm able to successfully initiate an FTP session
using the internal 192.168.1.8 IP address.
Any thoughts? I don't have to use a browser for the FTP as the people
I'm going to let in all know how to use DOS Ftp and will be named users.
My FTP server is War-FTP on Win98.
Here is that section of the network.conf file. Note that the SSH stuff
is still commented out -- that successfull SSH forwarding that I talked
about above was for my work -- this FTP thing is from home.
# Allows the firewall to be trusted for ssh access to routers...
# Override for below
#NOMASQ_DEST_BYPASS="tcp_10.0.0.1_ssh"
# services not to be masqueraded
#NOMASQ_DEST="tcp_0/0_ssh"
# Uncomment following for internal services.
# The following is an example of what should be put here.
# Tuples are as follows:
# <protocol>_<extern-ip>_<extern-port>_<intern-ip>_<intern-port>
#INTERN_SERVERS="tcp_${EXTERN_IP}_ftp_192.168.1.1_ftp
tcp_${EXTERN_IP}_smtp_192.168.1.1_smtp
# These lines use the primary external IP address...if you need to
port-forward
# an aliased IP address, use the INTERN_SERVERS setting above
INTERN_FTP_SERVER=192.168.1.8 # Internal FTP server to make available
#INTERN_WWW_SERVER=192.168.1.1 # Internal WWW server to make available
#INTERN_SMTP_SERVER=192.168.1.1 # Internal SMTP server to make available
#INTERN_POP3_SERVER=192.168.1.1 # Internal POP3 server to make available
#INTERN_IMAP_SERVER=192.168.1.1 # Internal IMAP server to make available
#INTERN_SSH_SERVER=192.168.1.1 # Internal SSH server to make available
#EXTERN_SSH_PORT=24 # External port to use for internal SSH
access
I saw the INTERN_SERVERS line, but I assumed that since I didn't have
external IP addresses, that it still stays uncommented as it did on my
other router for SSH forwarding.....
thanks.
mike.
_______________________________________________
Leaf-user mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/leaf-user
