As the first link says, the patches for the Mountain (Materhorn/Eiger) releases, including Eigerstein, are included in the kernel tarball. For LRP 2.9.8 using the old 2.0 kernel: ftp://ftp.linuxrouter.org/linux-router/dists/2.9.8/kernel/2.0.36pre15-1- patches.tar.gz For LRP 2.9.8 using the 2.2.19 kernel: ftp://ftp.linuxrouter.org/linux-router/dists/unstable/kernel/2.2.19-1-LR P.patches.tar.gz For LRP 2.9.8 using the 2.2.16 kernel, I believe the patches are in 2.2.16-1.tar.gz at the same site. There are versions of the patches for 2.4 kernels floating about, from Charles and/or George Metz, IIRC. -Richard > -----Original Message----- > From: Neal Barrett [mailto:[EMAIL PROTECTED]] > Sent: Thursday, June 28, 2001 11:58 AM > To: Richard Doyle > Cc: Linux Router > Subject: Re: [LRP] kernel 2.2.18 > > > The document refers to kernel patches for LEAF/LRP... Where can I find > these, and their documentation? > > ----- Original Message ----- > From: "Richard Doyle" <[EMAIL PROTECTED]> > To: "Neal Barrett" <[EMAIL PROTECTED]>; "Linux Router" > <[EMAIL PROTECTED]> > Sent: Tuesday, June 12, 2001 12:45 PM > Subject: RE: [LRP] kernel 2.2.18 > > > > LRP uses a patched kernel; see: > > > http://sourceforge.net/docman/display_doc.php?docid=1453&group > _id=13751 > > and related documents at > > http://leaf.sourceforge.net/content.php?menu=1105&page_id=19 > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED]]On Behalf Of > Neal Barrett > > > Sent: Wednesday, July 11, 2001 2:23 PM > > > To: Linux Router > > > Cc: Charles Steinkuehler > > > Subject: [LRP] kernel 2.2.18 > > > > > > > > > I am running an LRP kernel version 2.2.18 and I can not seem > > > to be able to > > > get my module for the Rocketport PCI card to compile and > load cleanly. > > > (misc/rocket.o) > > > > > > To compile the module for the 2.2.18 kernel, I had to > download a later > > > release from sourceforge (comtrol-1.23) before it would > > > compile cleanly. I > > > was running a Caldera box on 2.2.10 kernel... So, I > > > downloaded and compiled > > > a 2.2.18 kernel from kernel.org. Next, after make dep... > > > clean... bzImage... > > > modules... and modules_install... I "tar xzvf" the comtrol > > > driver to the > > > /usr/src directory and cd to it. I then ran a make clean and > > > make... It > > > compiled cleanly. I copied this to the LRP box (via floppy) > > > and tried in > > > "insmod" it. It gave me a slew of errors about unresolved > > > symbols... and did > > > not load. Currently, I am using your rocket.o file from the > > > 2.2.16 kernel on > > > your website and using a "insmod -f" to load it... I works, > > > but gives an > > > error/warning that it is compiled for a different kernel version. > > > > > > My question is... Could you explain to me how to compile the > > > kernel and > > > modules for a given version such as 2.2.18 in a way that will > > > make it usable > > > on an LRP machine? > > > > > > Thanks! > > > Neal > > > > > > > > > > > > _______________________________________________ > > > linux-router maillist - [EMAIL PROTECTED] > > > http://www.linuxrouter.org/mailman/listinfo/linux-router > > > > > > > > > > > > > > _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] http://lists.sourceforge.net/lists/listinfo/leaf-user
