Hi Brian
The card that is refrenced in the /etc/pcmcia/config file is the 3CCFE575CT
card. Is this different to your card?
If so you might try adding an entry for your card in the config file so that
it references the 3c575_cb module.
Peter
---------------------------------
Peter Stokes
Ashlyn Computer Services Ltd
Tel: +44 (0)1636-627900
Fax: +44 (0)1636-627909
Mbl: +44 (0)7977-532320
Web: http://www.ashlyn.co.uk
---------------------------------
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of brianjd
Sent: 13 July 2001 20:26
To: [EMAIL PROTECTED]
Subject: [Leaf-user] Cardbus PCMCIA
I haven't been able to get CardBus cards working with Eigerstein and
Bill Dudley's modules.lrp with PCMCIA. I added cb_enabler and
3c575_cb to my disk, but my 3Com 3ccfe575b cards are not recognized. I
have added the tulip driver and tried some NetGear Cardbus cards and
they don't work. But, my 16-bit 3Com card works and my CompactFlash
adapter works.
cardctl ident shows no information on any CardBus cards inserted.
I have cb_enabler.o in /lib/modules/pcmcia along with 3c575_cb.o.
My error message is "unsupported card type detected!"
Everything works fine when I boot my laptop from the hd and run Redhat
7.1.
Any ideas on what I may be missing for Cardbus?
Thanks,
-- Brian Deep
_______________________________________________
Leaf-user mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/leaf-user
_______________________________________________
Leaf-user mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/leaf-user
