Hi Sandro,
I have made some progress here. It only seems to panic with the IDE kernel
loaded, it seems to work just fine with the floppy only kernel. Even booting
with the IDE kernel on the floppy also causes the panics. At least I can get
something going by using a floppy at this stage.
I will follow your advice and ask the CIPE list.
John
>-----Original Message-----
>From: Sandro Minola [mailto:[EMAIL PROTECTED]]
>Sent: Tuesday, 18 September 2001 2:17 AM
>To: John Hamill; [EMAIL PROTECTED]
>Subject: RE: [Leaf-user] Problem with cipe
>
>
>Hi all
>
>I'm very sad about your stories about CIPE.
>I wrote on leaf.sf.net that "it's tested with the following
>kernels". Well,
>I didn't test CIPE in practice. I just tried to load the
>module, run the
>executable and configure the interface, but I never tested it
>in "real".
>I know that CIPE is a very tricky tool (I was not able to
>compile the newest
>CIPE, I tried everything).
>
>I would be very happy if someone has an idea why those
>seg-faults happens
>after loading. Perhaps you should ask this on the CIPE list. I
>don't use
>CIPE yet, it would be better if you ask because you have more
>expierence
>with it.
>
>(I'm just the compiler, not the user.. ;) )
_______________________________________________
Leaf-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
