Gary: There is a DOS based config program for the 3c509 cards. Think you can find it on Donald Becker's site http://www.scyld.com or on 3com's site. The file is 3c5x9cfg.exe What I did was create a DOS bootable disk and copy the 3c5x9cfg.exe file to the dos disk. Then I can boot my LRP machine into DOS and configure the nic's, shut down and reboot with the LRP disk and the cards should work. Robert Chambers
Gary St wrote: >I'm trying to set-up two 3Com 905B cards, both cards >are using irq 10. I tried setting the IRQ's in modules >file as: >3c905 irq=9,10 >and it didn't work. >I'm thinking I should be able to boot to a >bootable disk and set the IRQ's. Either that or I have >to load Win95 and then set the IRQ's. Anyone ideas? > > >Thanx > >Gary >[EMAIL PROTECTED] > >__________________________________________________ >Do You Yahoo!? >Listen to your Yahoo! Mail messages from any phone. >http://phone.yahoo.com > >_______________________________________________ >linux-router maillist - [EMAIL PROTECTED] >http://www.linuxrouter.org/mailman/listinfo/linux-router > > _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
