I'd try the Intel's -- there've been problems with the Tulip drivers, and I've seen crashes myself under 2.2 and 2.4. Jack
On Sun, 18 Nov 2001, ITCom wrote: > Both cards in both computers where on of the various versions of the Netgear > card using the Tulip driver. I matched versions in each machine but the > machines may be different. We have a lot of those cards lying around. I have > some Intel I can try. > Thanks > > ----- Original Message ----- > From: "Jack Coates" <[EMAIL PROTECTED]> > To: "Bill Hults" <[EMAIL PROTECTED]> > Cc: "leaf" <[EMAIL PROTECTED]> > Sent: Sunday, November 18, 2001 8:17 PM > Subject: Re: [Leaf-user] errors > > > > On Sun, 18 Nov 2001, Bill Hults wrote: > > > > > Hi > > > I'm using Dachstein RC2 with success at several sites but one of them is > giving me an error message & then stopping traffic. It works fine for a > while (18 hours)and then stops. Rebooting > > > fixes the problem. I've swapped hardware to no effect > > > The message is "eth1:too much work during an interrupt" the "Restarted > Rx" > > > TIA > > > Bill Hults > > > > > > > This is typically a driver bug -- what kind of NIC is eth1? > > > > -- > > Jack Coates > > Monkeynoodle: A Scientific Venture... > > > > > -- Jack Coates Monkeynoodle: A Scientific Venture... _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
