I've got the Dachstein RC5 up and running and I copied over the configs for
IPSec 1.5.
I just copied over all the previous configs from 1.5 and everything connects
(ipsec manual connection) without any errors that I can see, even poking
thru all the debug output shows everything as 'success'. I have left and
right firewall = yes and when I type 'route' I can see the routes built for
ipsec0. Same with 'Ipsec eroute' shows the correct tunnel routing.
But I can't ping any hosts on the remote network. (10.72.104.xx)
There is traffic coming to me, but none from me to the remote
site........can any one suggest something that I might have missed?
Thanks
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 72 1 0 0 0 0 0 0 72
1 0 0 0 0 0 0
ipsec0: 205 11 0 6 0 0 0 0 0
0 0 12 0 0 0 0
ipsec1: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
ipsec2: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
ipsec3: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
brg0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
eth0: 9570177 14261 0 0 0 0 0 0 1523368
13295 0 0 0 0 0 0
eth1: 1854131 17992 0 0 0 0 0 0 11674810
18695 0 0 0 279 0 0
eth2: 143889 957 0 0 0 0 0 0 111525
1036 0 0 0 3 0 0
_______________________________________________
Leaf-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
